Search results

  1. Mr.Arizona

    Captiveworks CW-600

    Have you tried the channel up and down keys or the page up/down keys on the remote to switch between E and W?
  2. Mr.Arizona

    Diseqc/ecoda power output

    Thanks guys. That will make it much easier!:)
  3. Mr.Arizona

    Diseqc/ecoda power output

    Ok, but are both ports powered with 13/18 volt (whatever pol. i selected) at the same time or (hopefully) just one?
  4. Mr.Arizona

    Diseqc/ecoda power output

    Tried to find the answer using 'search' but gave up after 12 or 15 pages of results... Question: On a 4x1 DiseqC switch, are all ports powered or just the one I am switching to? Same question for an 22khz-switch (ecoda) I am planing to add more dishes/lnb's to my setup, but my concern is that...
  5. Mr.Arizona

    Lowering LNB Temperature

    ...not sure if they mentioned it in the videos. But he is at least 3000 miles away from the edge of the footprint. I was reading about it in the German version and was very impressed. Just my 2 cents...
  6. Mr.Arizona

    Would like to discuss Box channel lists.

    I bet you tried it already... 1) Make a factory reset 2) Boot the box while using the switch on the back 3) set your lat and lon for usals 4) modify the settings for ONE satellite, move to the sat and save 5) go to the blind scan, make sure the satellite is marked and ONLY this satellite 6)...
  7. Mr.Arizona

    FTA KU dish with LNB bracket for two LNBs

    If I got you right, the best thing to do would be using a dual LNB.
  8. Mr.Arizona

    Hi i'am new here can anyone help

    Intelsat 805 @ 55.5W Jamaica News Network - 3606 V RE TV - 3735 V Intelsat 707 53.0W SportsMax - 3820 R
  9. Mr.Arizona

    Actuator question

    There we go. That's exactly my problem! I will give it a try tonight. Thanks Lak7.
  10. Mr.Arizona

    Actuator question

    Thanks so far. Right now I am using an DG2100, which doesn't seem to be the "original" (flea-bay crap?). When i " fine tune" my setup, let's say from 112 true south to the east, it works good. If i now move over to the west from my true south i have a "movement" of about 1 degree at the motor...
  11. Mr.Arizona

    Actuator question

    Hi there. what actuator would be needed to move a 1 meter offset within ~120/130 degrees? 12", 18", 24" or 34" I played with some H-H motors and there is too much movement, for my taste, when i move from one site of my true south to the other side of my true south (almost 1 degree here and...
  12. Mr.Arizona

    Can find fta sats

    Someone asked for a satellite file for the VS ULTRA. I put one together during my little breaks at work. There is no guarantee all that it's working :)
  13. Mr.Arizona

    Amazonas 61.0°W

    I bet is asking for 61.5W not 61W :cool: ...and if the footprint is correct, you would be out of coverage anyway. ...or 61W C-Band?
  14. Mr.Arizona

    QPH-031 setup

    Oh, ok... i can live with that. At least it makes sense now... :eureka Someone should tell them that they have a bug in the tech-spec-fact-sheet-whatever-page :D
  15. Mr.Arizona

    QPH-031 setup

    I am not sure either about the purpose of my question. It was just the fact that I was reading the fact sheet for the LNB :) But anyway... I can't find any bird on the US arc with H/V signals over 12.2 ...and as Iceberg wrote: I might just thinking too hard :D That's what's always happening...
  16. Mr.Arizona

    QPH-031 setup

    Thinking too hard? :D That's possible! ;) Linear is 11.7 to 12.7 Circular is 12.2 to 12.7 so what about the 12.2 - 12.7 for linear? I THINK I'm still confused...:p Edit: ...or do i just duplicate the satellite in my FTA with an LOF of 11250 for 12.2-12.7 for linear?
  17. Mr.Arizona

    QPH-031 setup

    The more i read, the more i get confused. I'm sitting here on my lunch break (:hungry:) and go over the fact sheet from invacom. Now the confusing part... Everybody is saying the same for the setup. LNB Standard 22khz off 10750 for linear 11250 for circular ok... but... The fact sheet says...
  18. Mr.Arizona

    offloading 9200HD PVR files copy to PC?

    I believe that's an Fedora issue, it becomes a little bit irritated with USB devices during the boot process when it's not sure what to do with it. It is also complaining about your mouse and keyboard and i bet they work fine. Ok... let's assume there is no problem after booting up the...
  19. Mr.Arizona

    97W no signal

    Is it possible that your LNB is for circular signals, while G25 is sending linear?
  20. Mr.Arizona

    Mission possible :-)

    Yep, it looks to me like a software limit from the box. I will try tonight after work.
Top