Search results

  1. Edmund

    Can't program remote for Panasonic Home Theater

    Try the following: 1. av1 or av2 2. press and hold MUTE & SELECT for two blinks, release 3. enter 2 0 4 9 0 to get the volume: 1. av1 or av2 2. press and hold MUTE & SELECT, wait for two blinks, release 3. enter 9 9 3 4. press SELECT
  2. Edmund

    Programing Soundbar for volume with genie remote

    The code you need is 32609, but it isn't preset into ANY directv remote, especially the rc71, which has no audio codes at all. It has to be sent to remote by the receiver.
  3. Edmund

    RC66RX Remote

    Try the following: 1. dtv 2. press and hold MUTE & SELECT, wait for two blinks, release 3. enter 0 0 0 0 1 If it controls your HR44, the remote was NEVER in RF mode to begin with. Remember the Hr44 accepts both IR & RF at the same time, RF from Rc71, and IR from any Directv remote set to...
  4. Edmund

    RC66RX Remote

    The rc66RBX will not control the hR44 in RF mode, don't waste your money.
  5. Edmund

    A low-cost DVD Player that works with RC-65 remote?

    Many keys on the rc65 remote are strictly for directv receivers, like the color keys. Press each key under the av1 or av2 device, if the light above the directv device goes on, that is a key only available to directv receivers no matter what dvd or blu-ray code is used. So you may not need a new...
  6. Edmund

    two receivers in one room-independent control?

    Program av1 or av2 device with default IR code 00001: 1. av1 or av2 2. press and hold MUTE & SELECT, wait for two blinks, release 3. enter 0 0 0 0 1 Now enter the menu of the second receiver and switch like you did the first.
  7. Edmund

    two receivers in one room-independent control?

    For directions, see this thread: http://www.avsforum.com/t/1458474/setting-up-multiple-directv-receivers-on-harmony-1100-in-same-room#post_22971599
  8. Edmund

    Blu-Ray Player and Remote Codes

    The color keys on Directv remotes are strictly for directv receivers, no non-directv code in the remote has the color keys mapped, sorry.
  9. Edmund

    REMOTE RC71

    If you read the description of the backlit remote, you see it's of the older type of remote, just has the wrong photo. There is no backlit rc71.
  10. Edmund

    H24-100 remote

    Sure, couple of ways to put it back into IR mode, easiest is to just program 00001 to the directv device: 1. dtv 2. press and hold MUTE & SELECT, wait for two blinks, release 3. enter 0 0 0 0 1
  11. Edmund

    H24-100 remote

    If the H10 remote is RF mode, use your H24 remote to put the receiver into RF mode as well, through the receiver menu, once receiver no longer responds to the H24 remote, do the following on the H10 remote: 1. dtv 2. press and hold MUTE & SELECT, wait for two blinks, release 3. enter 0 0 0 0 1...
  12. Edmund

    Programming remote

    After a 981 reset the directv device is programmed with code 00001 already. If still doesn't respond, than the receiver might be in rf mode: 1. dtv 2. press and hold MUTE & SELECT, wait for two blinks, release 3. enter 9 6 1 4. press CH UP 5. enter last 6 digits of Receiver ID #(RID), found on...
  13. Edmund

    Need some help with universal remote

    Ask here: http://www.hifi-remote.com/forums/index.php?sid=8698080b21c65e0cf1db8b137c31b932
  14. Edmund

    Need some help with universal remote

    To control the HR44 by IR, the code in the RCA remote is 1377.
  15. Edmund

    Universal Remote Optimized for DirecTV?

    Unlike your rc66, which has preprogrammed codes, the rc71 has very little tv codes and No audio codes preset. It relies on the HR44 to put the right code into your remote, a code that wasn't present in your remote before. And when programming the rc71, you do not use MUTE & SELECT, its MUTE &...
  16. Edmund

    RF Remote

    Even if the HR44 responded to the old RF remotes, you didn't have RF remote, the rc65x is IR only.
  17. Edmund

    DirectTV remote

    If the hr44 is like other two directv receivers that accept both RF & IR at the same time,( the R15/R16 & the THR22 Dtivo), if you turn on the RF through the menu its RF only. You have to leave it in IR mode, just put the remote into RF mode, than it accepts both RF & IR. I do not have hr44 either.
  18. Edmund

    DirecTV/TiVo Peanut Remote ?

    Sorry, but the tivo peanut included with the THR22 hdvr, does work with hr20 and subsequent models of directv branded receivers and dvrs. Using both RF and IR. You can't say the same for original Directv Dtivo remotes, nor SA tivo remotes. Of course it won't control the HR44 Genie via RF, but...
  19. Edmund

    Direct tv HD DVR Gennie34 Remote ?

    http://www.avsforum.com/t/1479178/direct-tv-hd-dvr34-gennie
Top