Search results for query: *

Monday I finally had Fios Internet and phone installed, TV is not yet available in my neighborhood. The crew came out and installed the fiber cable to my barn, they used the old RG6 coax that was the Cable internet feed to pull the cable through to the Barn. They disconnected it at the ground...

I moved my power main to a 200/200a service at the barn\workshop and then a 200a underground circuit from the barn to the existing box at the house and a communication conduit to the phone box which is located just below the power panel. I pulled a new underground phone cable from the pole to...

My probable best location for the ONT is inside my barn\workshop. When I built it I put all of my utilities underground to the front of the barn and installed a dual 400\200\200 amp box with undreground runs to the location of the old main on the house where the phone box is also located, one...

Thanks Enthuzist, In my case it looks like the best bet is to run RG6 to an installation point and then let the installers pick what needs to be used. At this point I have only to replace the two RG6 cables that were installed through the exterior walls and use the 300 ohm cable to pull in the...

Our house was built in the late 70s and has as plethora of cables. 300 ohm wire was installed into each room but was never used. Phone wire was installed into each room and each room has two line capability. Coax was installed for cable TV by drilling through the walls and pulling it through a...

cableing As it stands now I have my dish (625) unit in the upstairs office and the standard 1 dish two coax set-up with the second TV in the downstairs family room. Part 1: I currently have a Stereo component setup with cd, dvd, and turntable. My plan is to connect the stereo and its...

cableing Sorry about mis spelling cableing. I have heard that I can do long runs with CAT5 cable and simply solder on RCA Plugs at each end. Any thoughts? It certainly would be easier to pull through walls and the attic than a bundle of coax.

I have my dish receiver in one room and want to run the TV1 & TV2 ourputs to the location of TV2, (75 to 100'). What kind of cable do I need to use for the best performance to an AV receiver located at TV2. I currently have an AV receiver located upstairs at the Dish receiver and I would like to...