Search results for query: *

Steve, You've trained your woman well, mine checks the bubble and opens bath room door and each cabinet door checking to make sure they don't swing, no peace untill I level using what ever means I can come up with. LOL!!!! Jim

Steve, I sense the mind at work with your comments in your response. My thoughts on using original location is that after looking at a picture of sensor mounting it appears unit is mounted in a near vertical position in relation to the Winegard bracket. Moving to out side of bracket was...

Steve, 1/4" bolts and nylon nuts would work just fine in place of 5/16". Sensor could be mounted as org. but on out side of bracket, needs to read 24 deg. when dish surface is at 90 deg. Jim

JayStil, Yes started with single LNB arm and dish just as yours. From the picture you posted the dish portion is the same with the omni mounted to the side with an arm connected to the crank up, appears mod would be the same. Jim

Steve, Here's a couple pic's (not the greastest but) showing how I mounted a Dish 500 to Wingard RW4600 Crank Up. Dish is in use right now so did not turn or put in travel postion. Remove single LNB arm and dish. Remove Dish 500 dish and LNB from 500 mounting bracket to reduce bulk and weight...

O.K Steve, Up on the roof with a camera, the mod is very simple and inexpensive. Lot of mind burning in the begining with trials and errors but end result works. Left out the word states in org post regarding skew. Give me a few days to get back to you, very busy being retired and all. (LOL) Jim

Steve, Have done this mod with Dish 500 duel LNB, skew is manual and one setting will get you accross 3 or 4 east to west without changing. Mod looks factory and functions as orginial with complete fold down. It has been functioning for two years without a problem. Believe triple LNB and dish...