Search results for query: *

Thanks for the reply, I beleive I have the D3, but not the F3 most likely the F1, what Im asking is can the F1 be controlled with another FTA or Satellite finder that is either laptop controlled or I can see what its doing, I have a Satellite data box that came with the RV but dont have any idea...

Hello guys and gals, I have a 1999 Class A RV with a Motosat dish on the roof, it is currently controlled by a Nomad 3 Sat finder, but the user interface suck like a big sucky thing, it's all blinking lights etc, very junky. The dish is moved with 12v I tested this with a cordless drill...

Hello gang, been a while since I posted, but here goes. I have a Motosat Nomad 3 controller in my Motorhome and it's driving me crackers, the user interface sucks as you cant really see anything thats going on. My question is can I use another directional controller to drive the motorized dish...

Help guys the wife is giving me the stink eye and it's Valentines this weekend.

OK guys rigged everything up like you said and on the 211 HD solo I'm only getting sat 119 no HD:mad: Any suggestions? maybe I hooked up the LNB wrong both lines are on the one side of the dual LNB should I take a RG6 from each side? Thanks

So its easier to run a seperate cable to the recievers? I'm going to be in the attic anyway to run the new cable to the multiswitch and I have plenty of RG6 bought a whole drum of the stuff, just run it from the aerial to the AV panel and then use a seperate normal splitter then pull new cable...

Jeez! the switch arrived man that sucker is heavyyyy! plus the smart cards arrives guess what wrong s # they are sending two new ones will this ever end??? Weekend warrior is in the offing I will however persist with this and see if I can get the system correct. Thanks for your help and the...

On the feeds as they stand from the dish, they come in and have dyplexers on them to feed the other TV both are dual TV1 TV 2 etc, I'm thinking that the installer used this set up to provide the feed to the other TV's. If I dont need them then thats fine I only have this installation as a...

Thank you!, only issue is the dish is a 100 feet from the AV panel looks like I'm running more lines in the attic. Do I need to dyplex the feeds to the recievers or are they good to plug straight in?

OK I went up and took a good look at what the installers have done, I didn;t however take the Dual LNB apart to check the wiring. What they have done is taken one wire from the wing dish to the dual LNB I can see three wires going to the dual but they must had made a connection somewhere...

Thank you again, would anybody have a wiring schematic showing the re-wiring that has to take place. I have ordered the multiswitch and it should be here next week. Regards

Thank you for your quick response, yes I have two dish units or a wing dish, one dish is poniting in a differant direction than the other, although these dish's are linked, one dish has three wires coming from it going to the other dish, then two feeds running back from that dish to my AV panel...

Hello all, I have been a Dish customer for several years and recently added an addition to the house therefore I need to expand my system. I tried to expand the system via Dish but they played me up and wanted to charge me hundreds of $$$ to do so. So I bought a couple of recievers new in...