Search results for query: *

44 CAN RUN UP TO 8 TV,S. EACH OUTPUT CAN BE CONNECTED TO A DUAL TUNER OR A SINGLE TUNER.AND YES YOU MUST HAVE A POWER INSERTER BEHIND ONE OF THE UNITS AND THAT LINE MUST GO TO THE #1 OUTPUT OF THE 44

SOUNDS LIKE LOW SIGNALS.SHOULD BE UP AROUND 77 TO 80 PERCENT DEPENDING ON WHICH TRANSPONDERS.WITH THE LOW SIGNAL THE RECEIVER HAS A HARD TIME RETREIVING UPDATED INFORMATION,WILL ALSO AFFECT THE AMOUNT OF TIME IT TAKES TO LOCK ON TO PICTURE WHEN YOU CHANGE CHANNELS.STRONG SIGNAL HELPS DOWNLOADING...

YOU CAN SWITH TV 1 AND TV 3 BUT THE TV AT #4 WOULD BE THE #2 REMOTE AND HAVE TO SET TV MOST LIKELY WHATEVER CHANNEL TV2 IS SET TO, USUALLY EITHER 60 OR 73.TV2 WOULD HAVE TO BE SET TO WHATEVER CHANNEL TV 3 WAS.AND YOU WOULD HAVE TO REPROGRAM REMOTES.HOLD DOWN TV BUTTON AT TOP OF REMOTE UNTIL ALL...

IF YOUR UNITS ARE HOOKED UP WITH DIPLEXERS THE DIPLEXERS HAVE A POWER PASS THROUGH.YOU CAN SEE IT IF YOU LOOK ON THE DIPLEXER . AS LONG AS YOU KEEP THE POWER PASS CONTINIOUS TO THE DISH YOU WONT SHORT ANYTHNG OUT.YOU JUST NEED TO IDENTIFY EACH LINE BEFORE YOU CONNECT.THE TV 2,S CONNECT TO THE...

DOES TV 3 AND TV 4 BOTH HAVE A RECEIVER CONNECTED WITH EACH BEING A SINGLE TUNER UNIT OR A ONE TV UNIT. OR ARE THEY BOTH BEING RAN WITH A DUAL TUNER.MEANING 2 TV WITH ONE UNIT.