Search results for query: *

47.5 N to be exact. Thanks.

Alright guys. So I ended up having to pay a guy to set it up for me. He couldn't do motorized but what we did was put the motor on and aimed for Galaxy 19. I think the quality bar is 80-90% now. Here is my current set up: Motor latitude: 48 Dish elevation: 15 Skew: negative (LNB has no marking...

So this is a brand new house. I assume the wall plate works because before we had cable internet running through it.

Q is always zero. I heard it takes 30 secs to get the signal? I got the coax running from the LNB and then connecting it to a coax cable on the outside wall. Then I connected the receiver to the wall plate.

OK so right now I'm aiming for 97W on a fixed set up. My settings are: elevation = 30.1 Azimuth = 147.3 Skew = -21.4 LNB. I turned this clockwise. Elevation. You can't see it but the number marking is for 30. Satellite says intelsat but it is actually 97W The next few pictures is me...

Does it matter if the names of the satellites aren't up to date. For example, 123W actually says Galaxy 10R. I downloaded the firmware from sonicview website and updated already.

In 7th grade I rode on one of those small, "special" yellow buses. LOL. It was kinda embarrassing.

would like to own a GEOSATpro 90cm dish to watch these channels: Vietnamese channels on 97W

Alright so I took the motor out to do a fixed set up and nothing. Do you guys thing it's the receiver? I bought it new. I've seen some posts where Sonicview wouldn't get signal. I wonder if there is a DTV receiver than can receive FTA signal? I may borrow one from someone I know if I can.

chapelrun, I have the SG2100. I used the same website but not able to get anything. Did you use all the same exact settings that this website gave you like I did?

The 41 deg, you mean the motor elevation angle right? The motor's booklet has 48 latitude with motor angle of 42. I do have a question about dishpointer.com though. When I put my address in, the green line runs straight down my house. But the compass wants me to go west a little bit.

I understand that it has to be plumb. My question is is there a difference between adjusting the plumb with vs without the dish attached. The reason I asked is I initially mounted the pole plumb without the dish. Now I just had to adjust the pole but I left the dish attached to the pole. Thanks.

The instructions from the motor's booklet made it sounds easy. However, did anyone tried this method before? The thing is the website has 2 boxes that the booklet didn't: motor tube angle and antennae bracket elevation.

Thanks. What do you think of picture 1 vs 2 though? I mean it's really weird because one side is pretty plumb it seems like and the other side is not so much.

1. Dishpointer wants me to set the motor elevation/altitude angle at 47.5 degrees. While the instruction booklet for the motor says that for latitude of 47, I should have the motor elevation angle at 43? 2. I rechecked the pole. Picture 1 is the measurement I used when I mounted it and this is...

Thanks man. Dishpointer say to set the dish angle at 23 degrees. I live in Burien, next to Seattle, WA. Did you get your 41 degrees from dishpointer too? BTW, So basically now I have to aim the set up at 180 degrees, go to the receiver, set the transponder, use the function "go to sat...

One question is still have is when I set the altitude to 47.5 degrees, the elevation inclinometer on the other side gives a different degrees. Does this matter at all? Also, since each mark is 1 degree, I can either set it to 47 or 48 right? I mean putting it on 47.5 is pretty hard. Thanks again

Hi guys. I have a 39" dish, Sonicview SV-360 Elite receiver, SG2100 dish and a dual linear LNB. Latitude: 47.4888° Longitude: -122.3328° Name: Moteck SG2100 Distance: 38148km Motor Latitude: 47.5° Declination Angle: 7.1° Dish Elevation: 23° Azimuth (true): 180.0° Azimuth...

Hello guys. I'm really getting confused here. Thanks for the help Your Location Satellite Data Dish Setup Data Latitude: 47.4888° Longitude: -122.3325° Name: 97W GALAXY 19 (G-19) Distance: 38602km Elevation: 30.1° Azimuth (true): 147.3° Azimuth (magn.): 130.5° LNB Skew...

I'm near the Seattle area. What kind of stuff do you have? I'm looking for a 36" dish, SG-2100 motor, Sonicview Elite receiver.

So looks like I would be paying the same price for either dish. Should I get the 39" then? Thanks guys.

Preferably in Western WA. I found out about mxmart.com so I might check them out. Thanks guys.

I'm thinking of driving up to Canada to pickup some equipment from a seller there. Anyone ever had trouble getting it back to the US, especially in WA state? Thanks

I've seen size between 1 5/8" and 2". I'm trying to buy this one but it doesn't have the size. 36" Round Satellite Dish Antenna - Incredible FTA thanks

What about the universal eave mount and then attach a J-pole to it? It says only for DBS dish but should be OK for 36" FTA dish too right? VMP DBS Gable Mount (GEM-1) from Solid Signal