Search results for query: *

@wallyhts: Thanks for your answer. My mqam is in standalone mode and for more options to programm and configure i m using serial(crafts-)port connection and "putty" . About "DVB128" ,mode it is selectable,but changing to it,is not supported. Anyway,it is not so important anymore,i got another...

Hi,sorry for digging out this thread,but i don t want open up a new one. I got a D9477 for less and now i want do some tests with it. As i have seen in the datasheet ,it should work in nearly all annex A,B,C areas. I m located in europe and so i need to use annex A for standard cable-TVs or...

I have to tell: Don t trust Azbox or the company who bought them.It is only the trademark. Before Azbox were sold ,contacts between reseller were broken and they were not interested todo support anymore. In europe only Azbox MiniMe or mediaplayer is still to have,all other boxes are sold out...

You have choosen for that cases wrong chip vendor. Other vendors give ready dokumentation to their customers ,so you don t need to make much experiences. Bye the way.... hobbyists have integrate MIS reception under E2. But you need Spark ST7111 Linux Box,because of the demod. Russian...

I don t understand,why experimenting with "new" chipsets,which are worser in many functions, than "older" solutions? Build a box with STm frontend....tuner 6110 + enhanced Demod 900 and you got all you need blindscan hw,apsk,acm,vcm,multi and generic stream. Use a Sigma Dsp,which handle nearly...

About Mpeg 4:2:2,see here : http://www.satelliteguys.us/threads/286960-4-2-2-on-the-MicroHD-in-the-future?p=2896633#post2896633

Got all that italians signals on 5 west with my pc-card,but all use PLS code or are crypted in mediaguard now. One transponder delievers DMB via DVB. ....and 12,5W signal is "only" CCM MIS transponder without pls,transponder delievers 4 streams,with good (hd)programmes ,all fta. Bad ,that...

Yes,i know,i use TSReader,but as i said before these programmes can t lock those "special" transponders , without the possibilty to edit/control pls code!

The question is ...How to do? Can only record a seperated single Ts of a transponder.Have to find out how crazyscan can record the whole one. Other application which are able todo ,can t handle pls codes.

For ACM/VCM mode ,i know, Brian wrote a future firmware will be able todo it. Any news? ...and in case of Pls code ,this parameter you cannot find with a blindscan,so you have to know and edit it by your own. Only some DVB-cards with Crazyscan software and/or broadcasting/measuring...

Most of the italian MIS transponders are "hidden" for standard receivers/software. They are using ACM/VCM and/or PLS-Code. But it would be nice to know,what MicroHd is doing here!

ASI out would be a nice option. Is there any way ,like pin headers,to catch the TTL SPI signals for an extra daughter board? For more infos of that board,please google: ASI-Out-v41 Datasheet-v1-0_en.pdf

Teletext grapfic is very oldschool,but this didn t stop the popularity here in europe. Brian,how do you get the Ts stream into the microHd,do you use a DVB-Modulator or the PCB parallel input?

Yes,but it s not needed. In this case you should not choose ,the "full-implementation" way. Pc-cards like TBS 6925 or Omicom,can receive ACM signals without negotiating.

Be surprised!;) http://www.satelliteguys.us/free-air-fta-discussion/270649-new-geosatpro-microhd-receiver-100.html#post2830097 So,for those signals,users have to wait for an enhanced firmware,which Brian announce for a later date.

Please try Telstar14R,some western europe feedhunters have catched from the us/eu beam some apsk16/32 signals. It looks likes the sporadic signals are adressed to NA. Sometimes the signals are fta and they contain different europe tv programmes. But they always use ACM/VCM modulation coding...

Best meter funktion i ever used ,you can find on the old openbox X-series. Showing signal and S/N in db,is more helpful for me.

Brian,your change your plans,real bad...hihi http://www.satelliteguys.us/free-air-fta-discussion/275466-300khz-stability-ku-lnbf.html Please make a test with your Sl1Pll and the Pll321 lnb. Would be order one,but i need a full ku-band version(10,7-12,75). Any plans on this? By the way ,you...

This is Inet CS ,not internal,that is no grey-zone. They (dealers,shops,users)all get busted,now or later. AEPOC: Joint police and industry action brings down card sharing pirate in record time

As an european,i can tell you,that is not true! No provider allows CS. 1.It is against providers contract-rules. 2.To use CS ,you have to use a Camd(Conditional Access Module Demon) which reads the smartcard. But all of them,have no license from a crypt company like Nagra or NDS etc. Most of the...

Ok,if you don t want to wait for replacement cable or make your own homemade, buy a new cable. Search for "Cables to Go 6-Foot Non-Polarized Power", at tigerdirect.ca website. Costs 4,91 CA $ +shipping.

No,you have not be concerned about it. That s only a 100% safety thing and not electrical.Changed Phase or neutral does not frying your receiver/ac power supply. Why safety? Best example in that case, is a lamp,were you have to connect phase/load to bottom contact of the socket. If not...

Oh,i have thought you bought a smartcard from a hotbird provider. For the satellites (above horizon)at your destination,use dishpointer.com. This gives you an overview,what theoretically can be received. But this is no guarantee for the praxis.

Sat-freaks /DXer are helping together and if you need "more" manpower ask friends and neighbours(so they also can see ,that your are not a spy or alien,lol),buy beef and beer and after installing, make a big party!

..and if you want to be 100%: look for cable colors (phase/load and neutral) and don t forget the core-end sleeves. Electrical wiring - Wikipedia, the free encyclopedia By the way: Is there any specified report how that fire in california were caused? The Nema plugs itself (and not only this...