Search results for query: *

Hello all. I do.apologize for flaming . I know there lots of members here with plenty of knowledge.and experience. Well, thanks to your help I was able to replace capacitors the right way this time, negative and positives sides how they should.be. caps are ok after receiver has been connected...

I ordered replacement caps from.digikey but when.soldered on they overheated. The specifications were same as the ones being replaced. 470uf, 105 c , 35V.. the caps that came in looked a little thinner and taller than.original ones. So apparently something not right. The receiver I'm trying to...

Thanks for.responses. as.far as.smoking the power board, I realized it wasn't the power board I was testing, but another component in.the mainboard. I plugged it back in and.everything.worked fine except.the previous issue of.no quality and signal. At this point.I.could.throw.away.receiver and...

i found a how to, more or less on repairing power supply. i'm trying to order several electrolytic capacitors to replace on power supply board. the reason i'm doing this is because receiver does not get signal or quality. the premise at this point is that there is no lnb power being provided to...

well, since i would otherwise be using receiver for a door stop, i retested on appropriate settings. i used dc voltage this time, the one with symbol of solid line and broeken line. the reason i used previous settings is i thought the symbols from multimeter and he sybmol behind receiver where...

thanks for response ok. checked the ic. there are two of them. the one closest to the chassis as i touched the fist prong, i guess the positive, it reads 0.00 dc ma. the middle one also 0.00 dc ma. the next one , i guess the negative reads -6.9 dc ma. now the other ic which is right next...

HAM operator, huh? i did a google search on HAM operator but i wouldn't know what to do with this thing. thanks for the tip though. i there someone who can guide me in the right direction on how to replace/repair this lnb power supply? can someone share on how to do the loop method..thanks and...

thanks. i did check to make sure lnb option is set to on. how do yu do the loop method? i have no way to take picture and post. sorry. i did take the cover off and looked at the insides. there is no swelling or leaks of anything on the caps. can someone post what the power source for the LNB...

Hi all. Wondering if.someone can help me out. My.sonicview 360e all the.Sudden stopped getting signal and quality. Tried all kinds of.settings even hooked up a diferent receiver and it.did.get signal. So, it.appears that the part that sends power to lnb is not working. My question is what...