Search results for query: *

I had the same problem last week. The credit card info appears in two places. New credit card info entered under "My Billing, Payment Form, Card" reverts back to the old info when checked again. When the change is made under "My Billing, Billing Preference, Edit, Payment Form, Card" the new...

I searched the forums and did a Google search and found many recommendations for the Winegard PS-9370. I ordered one this morning for $21.62 plus shipping from Willyselectronics.com but obviously have no personal experience with it yet. Many other sources and brands are available.

My situation is similar to Joeym82956's. I have had a 942 for a little more than a year with great OTA reception using the powered antenna provided orginally by VOOM. My 622 was installed three days ago and both the 942 and 622 are activated. The 942 receives 21 OTA digital channels. If I...

For what it's worth, the failure of the 942 to put out a 1080i signal after the receiver has been turned off and then back on is a problem that started with the 2.27 software update. Prior to that update, it worked fine with my Benq PE7800 projector. I contacted Dish on August 5 and explained...

The short answer to how my Voom OTA antenna is grounded is that it isn't grounded because the Voom installation didn't include a ground. No particular reflection on the Voom installer because the fellow who did my first E* install over eight years ago and the installer who did my upgrade to a...

Bookwalk, The diplexer is left in place only because I haven't had time to run a continuous cable from the antenna to the receiver. I'm using the existing cables from the Voom installation. The OTA antenna is on the roof, the dish is on the deck and the diplexer is straped to the dish mount...

Bookwalk, That's right. The Voom receiver is out of the circuit and the power comes from the 942. I have not directly checked for 12 volts at the connector but the antenna works as it did with the Voom receiver and, as I previously said, 12 V, 150 mAmps is written below the connector. The...

This is my first post so I hope I'm doing it right. I had a 942 installed a week ago and the OTA input is labeled 12 V, 150 mAmps. The antenna is the standard powered one supplied by Voom. I disconnected the Voom LNB from the switch at the dish, left the OTA antenna connected and moved the...