Search results for query: *

Will the DirectTV LNB work with a FTA receiver or would I need a B-block converter? NOT looking to get any free DirectTV but would at least like to see some bars of signal from ANYTHING on the FTA receiver.

Spent several hours yesterday and only twice did I see a flicker of a change on the screen. It occurred so fast that I couldn't tell what it was that temporarily replaced the 0.0%. I did stay up until 11:03 PM or whatever it was when the moon was within a tenth of a degree of the azimuth of...

119W, SES-3, 117W Any particular frequency on 97W?

I picked up an MK1-PLL and flashed the receiver with 6Aug-2019 release of OpenPLi 6.2. Selecting "Signal finder" from the menu after choosing the satellite the antenna is aimed at, I get no signal at all. Thinking it might help, I dug out an old DirectTV HR10-250 TiVo and an 18" dish with triple...

Is there anything wrong with the $4.95 LNB from eBay seller cctv-superstore? Since I have a single-tuner receiver but do plan to eventually get a c band dish, is there a recommended dual band lnb you would recommend or is it better to buy one ku and later a c band?

Thanks! That makes sense. Maybe later on down the road there might be more FTA on Ka band in which case, I think I read somewhere that this LNB would require 30v so I guess one would have to rig up a circuit to power it with the higher voltage and filter out the voltage sent from the receiver...

I've seen conflicting information on the forum about using a Hughesnet antenna and LNB for receiving FTA. I've got a Hughesnet dish with a radio part number 1505328-0014 which I assume is both transmit and receive. I've read that a Hughesnet LNB can be used and that one just needs to unhook the...