Search results for query: *

Sorry dont get on that much anymore but disconnect the cable that feeds the separator an run a check switch and that should clear the matrix

Regarding the E arc dish adding another receiver, yes a dp44 is the only way to do that but if you have line of sight for 129 & 119 110 then get 1000+ dish that requires a dp 44 switch because it also has 118.7 for internatiional if your want any international channels.

If you are keeping your superdish for 110 and 119 and a wind dish for 129 thats fine because for it to work now it would have to be all dp equipment anyway. Since you have a dp 34 with 2 lines to the 622 the same setup willl be fine for the 922 w/o separators. Since you have one line to the 311...

How long has anyone had Sky Angel via IPTV. I use to have it off the 61.5 satellite until dish killed that lease. They have added a few mainstream christian channels but it is in no way the same. I also see they have increased the sspeed requirement from 900mbps to 1.5. Any Help and information...

Avoid also any contract if possible but if you get a 722k then its worth the ota module use The Dish store its $35 I think Dish wants $50 because then you can modulate out to channel 3 or 4 & record the off air channels also.

Doc6666 is right but there is a work around meaning you can modulate tv1 to say 125 cable with tv2 cable 73. You just go into menu 6 1 5 you'll see it. All you have to do is go out the the modulator tv2 output with a two way splitter then a coax cable to your tv1 then out the other port into the...

If you want very high 1000.2 signal take a 1000+ reflector add and 1000.4 arm with a 1000.4 bracket and a 1000.2 lnbf and peak 119 sat transponder 16 and you will hit 80 or higher on your 129 transponder 21.

If you want to keep sd only then a 625 is the way to go it has 150 hrs vs 100 on the 522. You must specify that you want a 625 on the workorder. The basically have taken all the old 522 and made them into 512 with caps on the tv2 output. Keep that remote and when you get the new receiver the...

Also since you can view a different program off the tv2 output why not use that to watch it on your computer the modulate the tv1 picture to that separate room and I agree the 612 from personal experience it has had a poor record since its inception ie a lot of doas

Get a pair of sling links one by the router then the other by the receiver but no surge protectors in between. Have them shipped to you from dish along with the wireless link and while you are at trade that receiver for a 722 and ask them to waive the external hard drive fee. I did and to my...

The 722 has the atsc tuner built into it already which you already knoww but only for tv one. If you modulate tv1 to say 125 cable & tv2 to 73 cable for example and have an ota antenna hooked up to tv1 all you need is a uhf duplicate remote for tv & control it from the tv 2 location. Also the...

Use a digital optical cable from the receiver to your reciever and if the tv has digital optical out as well put that into a second audio input on the receiver.

Get a copy of each book that comes inside of each book of reflectors that arrive at the warehouse the 1000+/500+ and 1000.4 and 1000.2 dishes.

Hope this helps. The dish america package was know previously as Turbo hd you will get hd only feeds and your hd locals so look at the programming group under hd only. This also will only work with mpeg4 equipment only ie no 301 311 322 625 522 501 508 921 942 721 381 receivers. also rember hd...

129 sat for your zip cose is 20 degrees pointing at 252 degrees sw use transponders 21 to peak you should get 75 to 80 if using a 1000.2.

Heating is good. Teflon spray also but spray both the dish and the entire lnb and a dish 500 or 500+ or 1000+ or 1000.2 will do better then a 61.5 or eastern arc due to its lower dish elevation settings. Personal experince.

Since you are using a dish pro plus twin and a 211/211k use 119 but use transponder 16 to peak it out you should get around 90 or so. It may be obvious but make sure the mast is plumb. After the check switch make sure it reads 110 and 119 satellites reading both odd and even transponders then if...

At most it will only have a 1080i or 720p broadcast level the only true 1080p is blue ray none or either D* service.

get a sling link or two from your installer then menu 6 1 8 broadband connectivity will set you up. Fyi what is downloaded does not take storage space but will only stay on the box for a certain length of time.

LINK TO REMOTE CODES https://rweb.echostar.com/departmental_content/TechPortal/content/tech/remotehome.shtml

You must press and hold the aux buttone first until they all light up then press 2 then the code from the back of your receiver manual then hold the # button for it to store.

But a if you plan on replacing a 322 then just get a 222k and if you can an ota module

the 110 elevation in nc is 39 with 119 at 33 if using a dish 500 skew it at 128 elevation 36 if you have the raise the elevation higher the 119 will be somewhat less.

USE THIS LINK FOR POINTING ANGLES https://rweb.echostar.com/departmental_content/TechPortal/content/tech SKEW 129 ELEVATION 36 these are right out of the book connect a single line into the 1st port on the left side this is where the 119 signal comes out use this to peak the dish and if you...

try this link https://rweb.echostar.com/departmental_content/TechPortal/content/tech/techequiDish-1000.shtml IF THE WHOLE LNK DOES NOT WORK THEN JUST abbreviate it to rweb.echostar.com TRY 120 SKEW 32 ELEVATION but keep in mind the 1000+ is heavy just like the larger super dish so try...