Search results for query: *

Flat screen TV's can output CFF's that can interfere with remote signals and can stop them from operating all together. Make sure your TV is not in energy saving mode. Rule of thumb, the brighter the screen the less chance of interference. Also, make sure your 2-set couplers are not DC...

I have found on several occasions that the CLF's coming from flat panel screens can cause erratic remote function or complete loss of remote functions. This usually affects IR remotes but anything is possible. Make sure your TV is not in energy saving mode. Usually, the brighter the screen the...

Nova, With a dish 1000.2, add a dish pro single or dual to input 4 of dish 1000.2 and run check switch. As before mentioned, you can use a dish or direct tv dish. The direct tv dish must be the D tube type. If already subscribed to locals, you wil get 77 locals after check switch. this is the...

Good replys from all who answered. Just some info from my experiences. Most 2 way spliters are power pass in that all inputs are electrically connected for DC voltage pass. However, there are a few brands and models in which the ground side and the center conductor input are also electrically...

Jim, I see that Sadoun Satellite Sales, which I believe is a sponsor or advertizer for this site sales the SW21X switch. Probably you could use a disc2 switch, two way or three way, as needed.

Jim, The SW21X switch looks just like an SW21 switch, except for the X after SW21. These can usually be found by an internet search. The SW21X switch was designed to be cascaded after two legacy LNB's had been joined with an SW21 switch, either a legacy twin(which has a built in switch) or two...

If your m500 does indeed have a legacy LNB, and it looks to be a legacy twin, then you can use a legacy single or dual, pointed at 61.5, and joined to your existing cable with a SW21x switch, which is used to cascade after a SW21 switch, which is built into your M500. Run the check switch to...

My experience with loosing one channel has most always been a cable or cable connection problem. For instance, corrossion on and inside of F connectors, barrels, spark gaps and the like. Usually on a dish system, if you're missing a particular channel, an info screen will tell you what Sat and...