Search results for query: *

Thanks Tron! I got it working. In addition to the LNB Frequency setting, the switch type had to be set to DiSEqC 1.0 Port X for it to work. I was setting the switch to 'none' because the LNB directly connected to the receiver; for some reason it wouldn't work without a switch type selected.

Thanks for the help! I figured out the setup, but the menu is not like you described. There is no place to select the LNB type alone; the LNB type is combined with the LNB Frequency and appears under the "LNB Frequency" menu. Before I have tried all 11250 options under that (for DSS) and failed...

Thanks for your help, but it appears that your instructions do not pertain to the Viewsat Pro receiver. Unless I am missing it, this receiver does to have a plave to set the LNB type to "STANDARD". Everything else has been set as instructed except that the LNB is directly connected to the...

Thanks Iceberg, but when I select those LO Frequencies, the LNB voltage does not change to 13V for vertical polarity selection; it stays at 18V always. However, selecting 11250 Legacy Twin for CP switches the voltage, but satellites are still not found. There is no similar selection for 10750...

The problem is the Viewsat Pro does not have specific setting for "Standard LNBF". If you are referring to selecting just 11250 and 10750 under "LNBF Frequency", then it is not working for me; the receiver does not switch 13V/18V for polarity selection with those settings. If I select "Legacy"...

Anyone has the Invacom Quadpolar successfully working with Viewsat Pro? I am not able to get it working properly; may be because the LNB type selection is not correct in the receiver menu. I would highly appreciate it if you could post the antenna settings you are using for both Circular and...

Anyone has this LNB working with a Viewsat Pro? Anyone has the Invacom Quadpolar successfully working with Viewsat Pro? I am not able to get it working properly; may be because the LNB type selection is not correct in the receiver menu. I would highly appreciate it if you could post the antenna...