Search results for query: *

I started out with making sure my dish was not warped, and never got past that point. I used 6 strings, 1 from each wedge, and only 2 of them touched. Tomorrow i will go up with a friend and round it back out. Then we will verify the feed horn position. Right now it is sitting at the 38 hash...

I can do that monday when I go back up. It is suppose to get above freezing then. This is the LNB I am using. My dish is stationary, no motor. I have it mounted just like in the picture, heat sink up and rotated so 0 degree is off center a few degrees There are alot of settings on my box. is...

ok guys, I put the new LNBF up, rotated the dish, and locked in on EPIX with 78% quality on my Satlink. I went inside and got the epix channels, me tv, heroes, Decades, and a few others to pop up on the tuner. No newsy... I also noticed that I only got 1 Horizontal Transponder to show up. The...

did a scan again for every channel i could get from SES 1, with the specific TP parameters set. Wrote down the list of channels I got and checked on lyngsat. The channels are coming from Galaxy 17 91 W. I am trying to figure out why my STB and my sat finder both indicated that they were on the...

the LNBF came with mounting instructions, but not alignment instructions. I did a 90 rotation and it is now identifying TP with proper polarity

Titanium, Fixed cband with copper running from LNB to STB with no breaks or splitters. Cable run is about 40 feet. LNBF is a cheapo Ebay dual polarity C band one. The feed horn is ALOT smaller than the mounting ring that comes with it, and there is only 1 set screw to hold it, so I wrapped it in...

ok, I only get those channels when I do a blind scan for FTA, But i get them no matter what sat i scan and I found the 5150 setting on the linkbox. odd that it is under the antenna setting menu

Magic, I read the information on the link. explained alot Horsepower, on my sat link i have it set to 5150. no option on the linkbox for it. I went up, rotated the lnb, spun the dish to get 98 signal and 83 quality for the transponder on 101 i am after, and locked everything down. I went back...

Glad I said something. I can aim a dish no problem, but after that i am lost. I spent 12 years aiming dishes for the Motorola state wide paging systems. I had a nice loud indicator when I had it right. With FTA, I am learning it is a different animal.....

I configured the satlink with all of the transponder information for newsy and scanned for the signal. 98 strength, 0 quality. I switched the polarity to V and i suddenly got 44 quality. The channel is H. I followed the directions for installing the LNB, except i never installed the Dielectric...

Ok, so I will stick with the C band dish I have for future testing. However, the issue is the same no matter what I do, and I wipe all the TP before doing a scan. Read that on this forum somewhere.. Is there a possibility that my Satlink is wrong, and I am pointed at 91 and not Galaxy 16? I...

i get 84 channels, and the only free ones are the ones listed earlier in this post + sports net test. the rest are scrambled The TP frequencies are different than what lyngsat shows. On Galaxy 17 classic arts is 4066, but i get it on freq 4053

I get the same results form all 3 boxes, and for the signals I am only after FTA. I kinda figured the Directv dishes would not work, but i do get those channels off of them. I think I am going to scan from just 91 W and see what i get

I have a c band dish pointed towards Galaxy 16, 99 W. At work we have 5 Ku band dishes for both Dish and Directv. I get above 90% signal strength for 12 birds from 1 fixed position, and can scan and get channels from all of the satellites on the C band. The problem is they all come up scrambled...

When ever i do a blind scan I get the same channels on every bird I scan. They are religious channels or arts classic. BYU as well. I have a 3 meter dish with a dual polarity LNBF, and have scanned from a Manhattan 1978, a MOI box with tvheadend, and a Linkbox9000I. I get 95% on my satlink...