Search results for query: *

CanuckInNY, I'll venture outside tomorrow to see! My 84E can't see 91/82 at the sametime so I will optimize it for 91 with 0 skew. I'll report back my findings once I check it out.

New Brunswick, NJ here. I posted my signal levels from 91 from 2am today and just now at 7:30pm. I am on a 84E ChannelMaster. Going to tweak alignment and will report any improvement. (since some say you can't get 82 on this as well, some suggested putting skew to 0 and aiming just for one bird)...

I need to try repointing, but this is weird: using a new DPP LNB w/ separator at the receiver. Transponder 27 on 91 Tuner 1, says not locked. After about 5 to 10 seconds it shows signal of 84. If you toggle to Tuner 2, it "flutters" and then stays at 0. I'm hoping it's just a pointing issue...

Nimiq 6 Impact? Error 004 From the reports here, it seems that Nimiq 6 is partially active. I am missing signal on some transponders on 91, but another new issue is occuring. On channels 508 (HLN) and 579 (BPM) so far, instead of seeing a satellite signal error, I am getting error 004 (To...

I've had similar problems. Back in the late winter, I tried setting up the 84E on 91 & 82, but could never see both at once. I spent hours outside playing with the adjustments, but still couldn't lock signal to 91 & 82 at the same time. Was anyone successful in using a 84E to lock both birds? On...

I never completed my setup for the 84E dish, I'll save that for the other thread! Right now, in NJ, I have the ChannelMaster 84E only receiving 91. As the posts above, I am missing tp 3, 5, 9, and 11. Oddly, the 17,18,27,28 come in. On Monday morning, I had 40s on tp 27, but today it has 83...

I hooked up the dish, 84E, on a pole in a different location in my yard that has a clear LOS to 82/91. My question is, how should I set the skew/elevation? With the Dish500 on the side of the house, the settings now are 115 skew & elevation at 50. A dish pointing website shows that I should be...

Thanks Iceberg! I have a DPP LNB, with a separator before the receiver. I have to find a good spot to install the 84E, I can't mount it on the side of the house where the Dish500 is now. I played with it today in the backyard on an old pole I had for DTV, but there were trees in the way. (It...

I am curious if anyone has feedback, and if a larger dish (I am considering the ChannelMaster 84E) would resolve this issue. I am in the New York Metro area. I have a Dish500 with a DPP LNB. Nimiq 91 has strong signal ranging from 80 to 100. However, I have weak signal on Nimiq 82, due to their...

Update to my post, I let the receiver sit with the blinking light and black screen for about 6 hours. It magically came back to life with the screensaver screen showing. The box is working fine again.

I have a HD PVR, 9241. I was receiving the dreaded error 311 the other night where it would prompt to unplug and replug the receiver in after 1 minute. I decided to do a quick hard drive diagnostics on it. The result said "NO_HARD_DRIVE_FOUND" and then I rebooted the receiver by holding down the...