Search results for query: *

Series 59 cable can create intermod within the cable, yielding 6MHz beats and raising the noise floor. At lower freq's its fine, but as you increase in frequency(> 1GHz) there is more propensity to create the CPD-Intermod issues. Also Dish (and Direct) is not MoCA, its a proprietary multi-room...

Anything after the sat lines entering the node MUST BE TIGHT!!!!!!!! Cannot be stressed enough!!!!! A loose connector (less than 5 degrees from fully finger tight) in the hopper joey setup is death to the system and results in joeys searching for hoppers and then the stuck 1303 screen of death...

You are correct, MPEG4 requires less data to assemble the frames, the strength of the signal beam needs to be sufficient to create a sufficient SNR that the receiver can distinguish signal from ambient noise, as long as the strength of the signal hitting the LNB (or at the end of a long run the...

I don't know about imitation cable, but I have seen people visually mistake LMR 50ohm cable for RG-11 (I've done it several times in the lab) Seems right until its connector installation time.