Search results for query: *

  1. J

    Winegard Sk-3005 Slimline built in switch

    The Winegard SK-3005 has a built-in DVB receiver that it uses to Identify the Satellites. This receiver is connected to the ODU before the four user outputs. It needs a standard 950 Mhz to 1450 Mhz input so it would not be compatible with the SWM ODU. The SWM8 would be connected to the four user...
  2. J

    Winegard Sk-3005 Slimline built in switch

    A SWM8 should work. You cannot change to a SWM ODU. The SK-3005 has a build in DVB receiver that uses signals from the standard ODU.
  3. J

    Tuner 2 signal question

    Probably a bad cable or bad connector in the cable for tuner number 2. Swap the tuner 1 and tuner 2 cables. If problem moves to tuner 1 you need to check you cable and connectiors.
  4. J

    help in setup screen? what dish?

    The Dish that you have is equivalent to a 5LNB Multi-sat. The newer receivers will auto sense the dish type. Just hook it up and it should figure out the correct setting.
  5. J

    HR10-250

    Make sure that the 5LNB ODU on your Slimline dish has 4 connectors on it. If it has only one connector, it is a SWM ODU and it will not work with the Hr10-250. Post Number 4 above gives you the correct information. Use the Elevation and Azimuth and Skew Values that the Hr10-250 Guided Setup...
  6. J

    LNB SWM

    My experience with both the SWM5 and SWM3 is that if you watch the install Videos on YouTube you can achieve good results in under thirty minutes. Yes there are several steps that you need to follow. It can be done with even a simple signal meter or if you have a helper you can do it with the...
  7. J

    So I'm Just Screwed? Ready to Dump DTV

    Have Your Tried a SWM Setup I would suggest that your try a SWM8 or SWM S ODU. Another Option would be to install a higher grade Coax.
Top
Back