Search results for query: *

  1. C

    Pacific Northwest VOOMers!

    KOMO broadcasts in a very odd pattern, it is just as strong, and in the same location as most of the seattle stations, but it is broadcast directionally to the east, I guess trying to get it over the mountains some. Us out in bremerton are directly behind the transmission direction, so we only...
  2. C

    Pacific Northwest VOOMers!

    I have Voom coming in great in bremerton. Even in light rain. Keep in mind, I am at the top of an east facing hill, but I won't complain! The only problem is that I am having trouble pulling in Fox, as it, unlike all the other seattle channels, is actually broadcast out of tacoma, completely...
  3. C

    CA -SoCal Inland Empire

    one of the problems with contracting out the installs like Voom has done, is that they don't have as much leniency in policy, like the OTA antenna issue. The contracts provide for the standard antenna that they bring out first, and then it falls under a service call if it does not work...
  4. C

    OTA stuck on ABC

    My wife has seen this problem on occasion, but i have not. I rebooted her box, and it has not happened again (yet). She set up aervice call to just have them bring out tnew boxes... the problem with it is I have no idea if it will be exhibiting this problem when the service guys are here...
  5. C

    Split ota line for local on bedroom tv's?

    Well, different tuners rate signal strength differently, but any non-active splitter will reduce the signal strength. If your signal is already good enough to pull all the bits in, than after the splitter it may still be good enough for all the bits. It's areas on the fringe where the -4dB or...
  6. C

    Need Help on OTA

    Some diplexers cause a loss of signal strength, so if you are in an area that already has weak OTA signals, the additional loss of signal due to the diplexer could make the channels unwatchable. If you are currently wired up correctly with the diplexer, and are having problems pulling in the...
  7. C

    OTA What is wrong with this picture?

    The dual diplexer that i was given with my install (a channelmaster something) passes the DC from one of the boxes (the one on Out1) to the antenna. It is clearly indicated on the connection diagram on the diplexer. Out1 passes it's DC to LNB1 and to the ANT, while Out2 passes it's DC to LNB2...
  8. C

    Is your homeowners association pressuring you about antennas

    I would think that the eliptical dish voom is going with should be able to be replaced with two 18"ers, if your association gets cranky about it. The only reason the dish is bigger is to catch two birds with one dish...
  9. C

    Need Help on OTA

    my 2 box install included 4 coax runs of 175' each (per the invoice), so I think they should be able to do the runs.
  10. C

    OTA What is wrong with this picture?

    You should probably be able to pick up FOX with a directional antenna, the problem is it is a different direction than the rest. Like vurbano said, two antennas should work, but you would bee to install a channel 28 block on the other antenna, and a 28 passthrough filter on the fox antenna...
  11. C

    Split ota line for local on bedroom tv's?

    yes, this should pose no real problem, except that a splitter reduces the signal strength by a little more than half, so if you are on the fringe of getting your locals on the VOOM box, then the splitter may just drop them out of recieving range. A distribution amp should work, but would cost...
  12. C

    OTA 5.1 Question

    Just general info for slick (or anyone else with similar questions) Stereo Analog (2 Cinch connectors) can provide Left / Right 5.1 Analog (6 cinch connectors) can provide Left / Center / Right / LeftSurround / RightSurround / Subwoofer Coaxial Digital (1 Cinch connector, usually orange)...
  13. C

    My Installation Diagram

    Kaw, that multiswitch has an antenna input, and should work (better probably) withough the diplexer on the antenna. I have attached a simplified diagram of the ideal setup for you. The only way you could get a better image than this would be to use a distribution amp off of the antenna and...
  14. C

    My Installation Diagram

    Just out of curiosity Kawdog, what make and model multiswitch did they install? This setup seems to be a little overboard. Also, how good are your OTA signals?
  15. C

    How to get rid of the Diplexer???

    Also, you may end up having to use the diplexer when adding the three additional recievers anyways...
  16. C

    Is your Dish grounded?

    I do not have the dish itself grounded, though lightning strikes in my county about twice a year. The cables are, however, grounded on a standard ground block. This will still shunt anything to ground, and at worst, smoke the dish and the cable to the ground block. This is standard, and this...
  17. C

    Square Shooter And Analog

    hehe, move to seattle! i don't even think there are any non-digital channels here.
  18. C

    Square Shooter And Analog

    HD channels OTA are just UHF channels. If you see an antenna hyped as a HDTV antenna, odds are it is just marketing. An antenna that was a good UHF antenna 30 years ago, would be a good HDTV antenna today.
  19. C

    Square Shooter And Analog

    You won't find much in the way of analog information here, the VOOM STB only has a digital tuner in it. Also, just the act of splitting the signal to go to an analog tuner will cause a loss in the quality of the Digital signal.
  20. C

    How does your OTA install look?

    The antenna that Voom uses, the Channel Master StealthAntenna, is one of the aesthetically best looking antennas available. Not bad reception to boot... If it weren't raining, I'd go snap a pic of mine, but, wouldn't do much for you right now.