Search results for query: *

Just set up a 90Cm GeoSat Pro dish with S1Pll LNB for 125W using MicroHD and am experiencing the same issues of weak reception and "jumpy" signal levels. I find 12180V is stronger than most but have the more of a problem with 12112V OETA. I even tried using mirrors to check the best focal point...

Thanks, didn't realize I had it on.

Not sure if this was requested already but do we need to see the "No Teletex" display flashed on the channel if teletex feature is not in use?

I use a harmony remote to do the microHd. It does not come up as a devise on their list so I had to enter each of the keys manually so the remote could learn them. The TV and Gbox are also on the same remote. Its very convenient that way!

Tried a little experiment. Replaced the DMX741 LNB with a 100 ohm resistor to approximate its current draw. The microHD through the GBox had no trouble moving to different combinations of dish positions for the Ku or C band, responding within 2 seconds each time. Replaced the LNB and again have...

Yes, an option to eliminate or reverse the 1st with the 2nd info screen for us geeks would be great.

The intermittent/delay dish movement is the same issue I reported a while back in the bugs thread and still have with my new GBox. I thought initially it was because the dish mover was in another room. I noticed when viewing the 22khz on a scope the square wave had quite a bit of distortion...

Reviewed DiSEqC sticky (good info). Did Factory reset . Strange the dish will move to some saved positions and not to others even if I resave the position. THanks for the help.

Thanks for the feedback. Perhaps its with my set up as the VBox is located about 30' away and maybe the distance is causing the DiSEqC pulse to become distorted and unreadable by the VBox.

I am not able to drive my dish motor through the VBox using the East/West buttons in the Switch/Motor menu. The motor is set to DiSEqC. Has anyone else tried to use this feature? Similarly the VBox will not respond to "Go to X" when changing to a saved satellite position. Thanks

I agree. I wouldn't care if the info screen wasn't displayed as the signal bar/info screen is more important to me.

Thanks for the DiSEqC link. Good info.

Update on my issues; Did a software reset and started over. Dish now moves when changing satellites. Still cannot blind scan when using Universal LNB 5150/10750. I can however scan individual transponders from the TP list on both bands.

"We will look into a solution. For now set up the C and KU satellites using the separate satellite positions and program the inline switch." No inline switch used except what is built into the DMX 741 LNB. Ku & C from same sat position. "Using DiSEqC 1.2 or USALS? If DiSEqC 1.2, did you...

I Just received my MicroHD today and am having issues with performing a blind scan. Its probably me so perhaps someone can give me some advise. Set up the antenna tab with Universal LNB 5150/10750 as I have a DMX741. When I try to do a normal blind scan for C band the pop up menu asks for a...

It was previously mentioned that the microHD will support 32APSK and 64APSK. It is not included in the current specs. Was this an oversite? Thanks