Search results for query: *

I performed a factory rest and these are the voltage results I got. 12177 V- 10.55V Back of receiver 12177 V- 1.5V At dish 11842 H- 13.84V Back of receiver 11842 H- 0V At dish There are no Diseqc switches between the receiver and the dish. It's just the cable between the MicroHD and the dish.

I did a factory reset and deleted all the transponders from Galaxy 19. After a detailed blind scan, the MicroHD located only the V transponders and it assigned a V and H polarity to all the V polarity transponders. On 12177, it scanned in a H and V polarity of this transponder with the same...

Thanks for the quick replies. I will try that today.

I have notice random channel outages on the MicroHD. I have my system set up to pick up Galaxy 19. All the channels I watch are on that satellite. This has been happening very frequent lately. All the channels on the same transponder will show no signal while all the other channels on different...

Before I swapped back to the original LNBF, I decided to troubleshoot the system to see if it was actually an LNBF problem or if it was a receiver problem. I hooked up my old Fortec-star Mercury 2 to the CW LNBF and performed a blind scan of G19. It successfully scanned in the G19 FTA...

I have a motorized system; the LNB is inline with the dish, it is not skewed.

I haven't tried switching it back to the original LNBF. The origional LNBF was an Invacom Quad Polar LNB; LO:10.750/11.250. The new LNBF is a Captive Works CW-200L; LO:10.750.

I recently received my new microHD receiver and I scanned in Galaxy 19 and others and it worked fine. I switched out my LNBF with a newer one and all my scanned channels lost their signal. I did a factory reset and blind scanned Galaxy 19. The scan produced double channels. Those channels are...