3 dp34 plus 3 dpp separators wiring diagram needed.

[stone phillips420]

hey guys DishNetwork is no help whatsoever I am trying to use 3 dp34 plus 3 dpp separators to 61.5 110 119.
my equipment is 110+119 dish quad lnb 61.5 dual lnb
my receivers are 721, 625, 522, 3 7200, and 501
the 7200's already have the legacy pro conversion box or vice versa.
I am trying to hookup 3 dp34 with 3 dpp separators for 522 721 625.
any help or diagrams is greatly appreciated
thanks

 

[Liquidforce88]

You cant use separators with DP34's. Thats why you can't find any infor on it.

How did you get 7 receivers on an accout? Or do you have 2 accounts?

You could still hook up all these receivers with DP34's. You just have to run 2 lines to each of the dual tuners.

 

[webbydude]

Well, hate to tell you, but the separators will NOT work with a DP34 switch. You will either need a DPP Twin or a DPP44 switch

 

[stone phillips420]

i have one account, executive offices add them with not too much hassle
so i need to get my dp34 replaced with 3 dp44.
will dp44 see a 7200 with legacy to pro conversion box or vice versa?
thanks

 

[Van]

I dont believe so, 7200 wont be able to see the switch if memory serves me.

 

[Liquidforce88]

You will not need the Dishpro adaptors with the DPP44. Why spend all the extra money for DPP44. You can get three DP34's for less than half of the cost of 1 DPP44.

 

[stone phillips420]

no money needed simple exchange
every step of the way with dish is a battle,
im requesting they ra mee 3 dp44 and i send them my 3 dp34
free of charge ill let ya guys know how i fair

 

[Liquidforce88]

Wha?

 

[webbydude]

Good luck getting Dish to RA your DP34's and having them replaced with DPP44's. IIRC, they will only replace equipment; not replace AND upgrade

 

[stone phillips420]

Good luck getting Dish to RA your DP34's and having them replaced with DPP44's. IIRC, they will only replace equipment; not replace AND upgrade

i need luck, apparently my request was not reasonable, so in return dish is sending me 3 dp44 for 443.76
I am getting one free i guess although at that price it doesn't seem worth it, but in the long run i guess it will be because i then can use the dpp separators as i wish too
Is this dp44 will be compatible with 129 orbital location?
thanks for your help guys

 

[BobaBird]

There is no DP44 and you don't need 3 of them.

If you can, exchange your DP34s and DP adapters for *2* DPP44 switches. That will let you connect 8 receivers of any type (legacy, single tuner, dual tuner). You will be able to add a 129 dish.

The 7200 will recognize inputs 1-3 as an SW64 and not see input 4 of the DPP44.