With the dish mounted on a plumb pole, you dial in the skew by twisting the dish on the mount.
Check behind the dish on the mount, and you should see some adjustments and a scale 90-0-90
You'll want to set your LO frequency to 10750...
... and put in the frequency of a hot transponder (see The List at top of any page)
Check behind the dish on the mount, and you should see some adjustments and a scale 90-0-90
You'll want to set your LO frequency to 10750...
... and put in the frequency of a hot transponder (see The List at top of any page)