Search results for query: *

Can anyone tell me where you can PURCHASE a HR-23 DVR one of these units other than thru DTV service? Thnxs Richard

Hello I got it figured out yesterday and have it working, but thanks for the good info. I just had to take a good look at the parts and I got it to work. Thanks, Richard

We just got the Slimline SL5S LNB and inserter and a 8 splitter. Does anyone no where there is some install instructions for this setup? All I can find is for the standard switch which ext and splitter. I no it is simple but would like to see some info on different ways we can insall it. Richard

I got all the equipment and waiting for next weekend to give it a shot and see what happens, hope all good happens. Thanks again, Richard

Thank you all for the good info. Richard

So you don't need a splitter on that one cable to go to each port correct? I don't see how to correct the title sorry. Thanks for the info.

Hello All, On the one wire hookup SWM and run itr to DTV DVR with twin tuners how does that work with only one cable? Do you need to add a splitter at the reciever? We are thinking of using the new SWM LNBF to use one cable. Richard

Hello all, That is what I figured to I ordered a new today to replace it.. The one that failed was on a new dish purchased about 6 months ago so I could not return it. Thanks all for your comments. Richard

Hello We are installing a new AU9-S dish and having a few issues here. Why do we get good signal out of only 2 ports and nothing out of he 2 ports on the AU9-s LNB??

One added thing using the old dish when we installed it we could not get it to work with out installing the Zinwell switch. I was told using the dual tunner rx we have here we need the switch when using that dish??????? don't no.

We do have 2 cables running to each reciever straight from the AU-9 What happens is that I have just tried hooking up just one cable from each reiecver and on one you get all and the there no HD . If we hook up both cables on ecach reciver one works other don't. It is strange I can't figure...

Hello We have just replaced the older sidecar 5LNB dish with the new Slimline 5 LNB dish. The question is that what I read we don't need a switch like Zinwell to make this work because it it has it's own switch built in. We are running 2 recievers Hr-20 700 on HD. When we had the old dish...

It is fixed it just toke 3 hours instead of what it said on the screen 1 hour. I is fixed thanks. Rich

Hello We just did a reset of a Philips dsr-7000 dvr and it says it may take up to an hour it has been 2 hours or more so far. It says it is cleaning and deleting do not turn power off. Any help with this one? Rich

I started new today and re-checked everything and now I have it up and running, the problem was ??? Thanks for your info jayelem. Rich

jayelem I have read that info and the info is for the SG2100 I have done al that and some more. I am trying to figure out if there is a problem with the motor or ??? The motor should not move back and forth 5 degrees and nver stop. Some thing is up with this issue. Richard

I have a HR10-250 DVR which I made a mitake thru the setup and switched the video format to HD and the tv that it is hooked up to now is not hd and we lost the video but the audio is there. How do we get the video switched back I looked in the manual I don't see any thing there to do that, we...

I just got a new SonicView SV-1000 and also a new dish 1 meter Fortec with the INVACOM QPH-031 LNBF ** linear + circular. -- So I removed the old dish and installed the new Stab-120 motor and aligned to the south. I installed the 1 meter dish and put the cable from the SV-1000 to the reciever...

Hello, I had it all set up running with the motor on and I got the new LNBF today and I wanted to try it out. So I ninsatted the switch and than nothing was working any more. So Iam wanting tell Tue to do the setup that the othere made. I bekieave I have everything correct but need to check it...

Hello jayelem I thought there would be many in Chicago, I was looking for a 100cm Fortec dish. I do buy alot from Sadoun but I don't like to pay the shipping on the dish $80.00 or so. I also don't want to drive to Ohio either to pick it up but that be nice to do just see and meet the guys...

That is the way I have it setup, but I will double check tomorrow when the sun comes up maybe. Thanks Richard

Hello, I will have to set up the cables like you said Tuesday it is dark here now and snowing a little it that time of the year. What do you mean here, I guess I don't understand which way from the motor. "Put the diseqc switch after the motor too."

Hello mrweather, IU will have to check it tomorrow it is dark here now and snowing a little. Thanks for the info. Richard

I didn't change the lnbs to standard left as unversal. Any thing else need to be changed, I am new this fta and multi feeds so please bare with me. Richard

I just got a new Invacom QPH-031 LNBF and I have trying to get it to work. If what I read you take a DISEqC Switch and run a cable from a L & C on lnbf to the switch in and one cable out to the motor to the RX correct? If so I have no signal at the reciever, I have a Fortec Ultra the dish is a...