Search results for query: *

Batavia,NY USA

Try these settings with blindscan program. Not my work-found on dvbn forums. The program can be downloaded at hxxp://www.dvbskystar.com Intervals : 7500 - 5000, 5000 - 3750, 3750 - 2500, 2500 - 1875 and 1875 - 1250. i scan every of this intervals alone with this setup: Carrier =...

Merry Christmas to all, and to all a good line of sight.

I learned all I know about fta from this site and especially Pete. Thanks for all the help!

My lnb will move my motor, but I can't get any signal all of a sudden. Can a lnb be bad, but still move a motor, or do I have an alignment problem or something? I just figured I'd ask before I make the journey to the roof. I do have a spare lnb to test with thankfully. Thanks.

Thanks SatelliteAV! I ordered one of the last black receivers yesterday. I was told there are still some silver in stock, so hurry if you haven't taken advavtage of this offer yet.

I'm going with the dog racing channel on Galaxy 3C called Raynham Park. 3916 MHz- Vertical 1860 sr Transponder 10 http://www.raynhamparkfun.com/

http://www.ettus.com This product might work with the right daughterboard. It does alot of interesting things. Wish I could afford one.

The weight and high winds finally killed my sg2100 motor that's attached to my 1m Winegard. It lasted over a year and I am constantly motoring, so I can't complain. I'm thinking of replacing the 1m with the 76cm Winegard to lessen the stress on my new motor. How much of a signal loss should I...

"I want to win the Moteck Motor from Sadoun"

My neighbors across the street asked if my 2 1m dishes were used for surveillance or spying. I just laughed and told them it was just for t.v. Soon after they were arrested for selling drugs out of their house. Now I know why they were so paranoid! They probably think I had something to do with...

Remember to skew your lnb once you get your dish pointed at G10R. I'm not sure if its clockwise or counterclockwise or the amount of degrees, but you'll definitely have to skew it since G10R is not your true south satellite. Some of the experts here can surely help more than me. Good Luck!

Thanks Stefan!

I'm looking to get a hd1000 soon. Is there any major difference between the rev.A and rev.B models? Just want to make sure before I buy. Thanks!

A company called Sigma Designs makes cards to do this. Three different models to choose from. Hollywood Plus, Netstream 2000, and X-Card. I recently bought the Hollywood Plus on ebay for $8.

My three installs were always off by a few degrees. I could have readjusted the dish, but found it easier to just adjust the longitude setting for usals by a few degrees in the receiver set-up to compensate for any difference. My true south is 79, but my receiver's longitude is set at 82...

I live in Batavia. G10R comes in great for me. I have a 1m dish and invacom .3 lnb. I've never even properly peaked my dish and I receive every tp listed on lyngsat for G10R. Even The Tube comes in without issues. I just recently helped install a 90cm dish for a friend in Holley(about halfway...

Thank you for this information. Almost bought a stab hh120 for my 1m winegard. You just saved me alot of cash!

If this means faster blind scanning and less heat generation; then I want it in pci cards immediately! Only a matter of time before this market really takes off(dishnetwork pirates will soon be fta converts) and the receivers become more robust. The demand is there. Nice find by the way!

38% rock steady with my satwork 3688, channel master 100cm, and invacom .3 flange connected to channel master feedhorn. The satwork 3688 is very stingy with quality readings. I experience no breakups at all with this reading.

I finally got it working. What a difference the netstream makes on cpu usage.Thanks again!

Sounds great! I just wish I could find one. If you ever want to sell an extra one or can give me a tip on where to find one; please let me know. There hasn't been one on ebay in awhile.

jerryt, Have you been able to test the blind scan app that works with the skystar 2.3? Just curious how well it's working. I've been looking for a 2.3 with no luck!

Thanks for the info Wayn23. Would you happen to know where I could find the 3.25 version of mytheatre. I found 3.25.1, but can't find any earlier versions than that. Graphedit wouldn't let me select source as a filter. Says it is in use. Maybe I should uninstall all programs that use the...

I'm trying to setup my netstream 2000 card to work with either mytheatre or dvb dream using a twinhan 102g. I just can't seem to figure out how to build a working graph using graphedit. All codecs and drivers are installed properly I think. Any help would be greatly appreciated.