Search results for query: *

I wasn't doubting Iceberg's advice at all. It's just that I had a spare SW2 laying around.

Thanks for your help guys. I looked around the house and don't have a spare diseqc, but I do have a SW21. Will this work? Motorized dish to 1 Fixed dish to 2 Output to receiver?

I only have 1 receiver right now.

I've got a motorized 90cm Fortec dish with an Invacom QPH lnb and a SG2100 motor. I have a Pansat 9200HD receiver. I would like to add a fixed dish to the mix, but don't know how to do it. Can someone explain how to do this and how I would change the settings on my receiver. Thanks

Thanks, guys!

I would like to add a single dish to my motorized system. I use a Pansat 9200HD running usals to move the Fortec 90cm dish. Could someone explain how I can do this, please. thanks

I'm thinking you're getting a Skywalker 1!

I have a Fortec 90cm motorized dish mounted on a flat roof using a non penetrating roof mount (NPR4A). I need a little more height to clear the top of a building. I get some transponders on this sat, but not all and I figure its the building. Does Sadoun sell a pipe sleeve that will fit over...

I contacted the manufacturer and was told the UK version would not work in the US.

There's been a break in the weather this week in the northeast, so I got a chance to start my motorized install with a trip up to the flat roof to bring up the non penetrating roof mount. I should have time to finish everything up this weekend. I have a Fortec 90cm dish with a sg2100 motor and...

I was wondering if a diplexor would work with a diseqc switch. I have a 4 port switch feeding a pansat 9200 and would like to utilize my hidef off air antenna. Do I put the diplexor after the switch or insert it before one of the ports? Thanks

Here's a reply I got from Fortec yesterday. I asked about European Models working in the US and when They would release passion in the US: "No it would not work properly here. The software does not support NTSC and the channel mapping is not completed for North America (which means that...

Will a European model work in the US? They look relatively inexpensive over there.

I installed an 8 foot dish years ago and had a problem with the ku band. C band reception was fine. It took me days to figure out what was wrong. The reflector (mesh) was slightly out of round. I replaced it and everything was fine.

The box was in great condition, not a mark or tear on it. I think it was done in the packing stage. I did notice at his website, it says no returns on dishes and if damaged contact the delivery company. I'll have to think twice when wanting a new piece of equipment.

I took everyone's advice and layed it flat on it's face and it is indeed still flat. Thanks everyone for your advice.

the paint is cracked and the lip is bent at that one spot. It's more at the lip at the back.

Al, The reflector looks great, no dings or dents. On the vendor's website (Sadoun) they say any damage contact the vendor (UPS), and we all know how that's going to go! I want to do the install today, because of weather conditions. It's unseasonaly warm here in Boston (60 degrees). The rest...

This pic might be better.

I got my 90cm dish delivered last night and started to put it together this morning. I noticed the dish is damaged. The outer lip is bent, obviously from being dropped in it's box. The surface still looks smooth and is not bent. I have attached a picture. Will this cause me any problems with...

Am I on target with AMC 6 as my true south satellite?

I use a Coolsat 5000 right now. The only option I have is a 30' rooftop. I have a non-penetrating roof mount. I'll probably use the Coolsat to line stuff up.

All right guys, my dish and motor came today and I'm raring to go! I'll be trying for my true south sat tomorrow. My latitude is 42.3 and my longitude is 71.04. I'm in Boston, ma. Am I correct that my true south sat is AMC 6? I'm using a Skywalker-1 and DVBDream, do these both support usal? Or...

Thanks guys. All ordered, now I'll be back to haunt you about installing it!

I'm about to pull the trigger at Sadoun's for a motorized system and I need some ideas on which motor to buy. I notice he doesn't sell Moutek's (sic) anymore. I'll be using a 90cm dish with an Invacom lnb. I'm in the northeast and was concerned with weather. Thanks