322 remote with TV/DVD combo

tsduke

SatelliteGuys Pro
Original poster
Feb 6, 2007
1,624
2
Iowa
Anyone know if there is a way to get the 322 remote to run a Magnavox TV/DVD combo?
 
VCR mode is a plus...

In my experience 9 out of 10 homes I goto with combo units do not program to the DISH universal remote.

In the owners manual there is just a handful that are supported.
 
did you try auto scan by pressing TV button until all light are on then bigger red power button after that scan up until TV turns off, this usually works on TV/VCR usually Magnavox are the worst
 
I think that I recently ran into one of these machines and found no code. What you need to do is to program each of the tv codes for magnavox then instead of trying the power button try the volume button to see if you can control the volume. If you are lucky then program the vcr codes to see if any will turn the unit on/off in the vcr mode. It takes time as Magnavox is a whore of remote codes.
 

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)

Latest posts