Looks in okay shape.
The dish is probably aluminum (?), so it looks new.
The rust on the mount isn't too bad to cure with a little TLC.
It's either a 6' dish, or that's a way-too-big motor.
Either way, we'll try to get someone to remove it for you, if we can.
Depending, the person might dig out the pole (and concrete on the bottom [hope it has some]), or maybe hack it off at or below ground level.
Most times, we want/need the pole, but it's a matter of how much trouble the thing is to remove.
Is there access to the pole by a vehicle.?
Some members back a truck up to the pole once the dish is off, and tie a chain around it, and tug it slightly to get it loose.
If you can measure straight across the dish, that would be helpful, too. :up
: 
:
: 
: 
:
