Whenever going to Antenna Setup, the unit locks up, i.e. no response to remote on any buttons. Have to power cycle to correct. Unit is loaded with new 07/06 firmware. No motor being driven. (Menu say "No Motor") Big dish driven by 4DTV. Finally getting around to setting unit up. Blind scanned 2 Ku birds. Now trying to setup the C band side of SES2 @ 87.
Had a problem after scanning the Ku side of SES2. Video was freezing and had no audio. Signal was strong but noticed that the video behind the signal screen was not freezing. Exiting the Signal screen, the video started freezing again. A power recycle fixed it.
With no power switch, doing these power recycles is a PITA.
Joe
Had a problem after scanning the Ku side of SES2. Video was freezing and had no audio. Signal was strong but noticed that the video behind the signal screen was not freezing. Exiting the Signal screen, the video started freezing again. A power recycle fixed it.
With no power switch, doing these power recycles is a PITA.
Joe