Does anyone have a CaptiveWorks CW-800S Manual?

Status
Please reply by conversation.

YoderIII

Member
Original poster
Jul 16, 2009
6
0
USA
I need a CaptiveWorks CW-800S manual. I emailed CaptiveWorks but so far no answer. A google search gave a little. Can anyone help? Thanks.
 
After reading your other post, I did some Googling and found very little, just someone's typed up version of a manual. I emailed them as well about half an hour ago. If you find one, be sure to get it uploaded into the "FTA Manuals" section so everyone will have access to it.
 
'evening,

This is kind of a zombie thread but I thought I would ask the question.

I acquired a Captiveworks 800s as part of a used deal with a dish and motor. I don't really expect to use the receiver given the other collection of hardware I have but while checking to see if I had the latest factory firmware I noticed there does not seem to be a manual for this box on the site.

I know it is old and moldy (the receiver that is, not the manual) but if there is still interest in posting the manual I will scan it.
 
'evening,

This is kind of a zombie thread but I thought I would ask the question.

I acquired a Captiveworks 800s as part of a used deal with a dish and motor. I don't really expect to use the receiver given the other collection of hardware I have but while checking to see if I had the latest factory firmware I noticed there does not seem to be a manual for this box on the site.

I know it is old and moldy (the receiver that is, not the manual) but if there is still interest in posting the manual I will scan it.
I can`t imagine there would be any interest in a manual for that receiver.It is really useless for FTA.So limited!..Hope you picked up a good motor and dish out of the deal.
 
Hello,
I have the CW800 in PDF format. Send me a PM with your e-mail so I can send you a copy, regards
 
Status
Please reply by conversation.

FTA RECEIVER

Movies on Cuban TV @ Hispasat 30w

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)