TRX1520 Help

[ga_relicman]

I'm just now getting around to installing my TRX1520 receiver. It's been in my shop for at least a month. I don't have a owners manual. I'm having problems wiring it up. I get a error message saying no return pulse. The dish will move some when I hit either east or west, and that's when the error message comes up. Can anyone help me out here?
Thanks
The Old Relicman
I'm not as good as I once was, but I'm as good once as I ever was!!

 

[Mr Tony]

welcome

Here is the manual for the 1420. I've owned both and the main difference is the 1420 is IR remote and the 1520 is UHF. ALso the 1520 has a TI filter
http://www.satelliteguys.us/showthread.php?t=92450

 

[Lynskyn]

Make sure the smaller 2 wires are connected to the actuator return pulse and gnd (no 5v). If they are and you still see that error, you probably have either a bad wire or a bad reed sensor.

 

[ats7627]

If you hooked up the Reed sensor to +5Volts, it's probably toast.