Which way is better? Multiple LNBs or just one steerable dish.

[corey006]

updatelee,

Is that pic in your Avatar a Gunnar .45 1911 ?

Norinco?

 

[developers]

Thanks Updatelee I will give it a try!
Jem

 

[updatelee]

Its a norc 1911 9mm, I learned after buying it about gunar's and should have bought one of his, mine required some tweaking to get it to shoot good, but its working awesome now

 

[glen4cindy]

How does one make use of 22Khz and the diseqc switch too? My setup menu has 22KHz, Diseqc, and skew for each satellite.

Actually, the skew can be different for each transponder on each satellite, but, I never change that since I have a motorized dish.

 

[updatelee]

ird -> 4x1 -> 22khz -> lnb's

 

[glen4cindy]

ird -> 4x1 -> 22khz -> lnb's

So, then, can you have a 22khz switch on each output of your 4x1 to get 8 positions total?

 

[voomvoom]

So, then, can you have a 22khz switch on each output of your 4x1 to get 8 positions total?

You could, but I would put 2 Diseqc Switches after the 22KHz Switch, one Diseqc for the regular side (22KHZ Off) and one Diseqc for the 22KHz side (22KHz On).

 

[updatelee]

You could, but I would put 2 Diseqc Switches after the 22KHz Switch, one Diseqc for the regular side (22KHZ Off) and one Diseqc for the 22KHz side (22KHz On).

encoda switch's will work this way, MOST will not pass the diseqc commands.

 

[Tron]

Also note that, to use 22k external switching, you must be using standard (not universal) LNB(F)s.