"LNB Drift Detected..."

[costanza]

I'm getting that message on my Vip211 along with "0x03, 0xa1, 119(e -5.28)(o 0.00), 110(e -5.21)(o 0.00)"

I've noticed that some channels (non-HD) take longer to tune to lately. I don't have these issues on my non-HD receivers.

 

[gadgtfreek]

There is a thread down below yours with the same topic, id give it a read. You may need to get your lnb replaced.

 

[Kru83]

if your drift is around -5 or +5 they recommend you get the lnb replaced.

if you are under the warranty setup service call.

 

[WiCkeDuDe]

I am getting the same message but mine is about 6.5. Sorry but what exactly is this drift? As far as I can tell everything still works. I even changed LNB's and get the same message when I go to system info.

 

[Kru83]

I am getting the same message but mine is about 6.5. Sorry but what exactly is this drift? As far as I can tell everything still works. I even changed LNB's and get the same message when I go to system info.

you need to clear the check switch matrix. after you replaced the lnb.