Recent content by Boogeyman

I am in Watertown and the spot beam channels are not good. To look at football games is the most awful thing to look at. It’s about time that some pressure be put on Dish to start giving us the HD large screen display. After all isn’t this what we are paying for. Maybe the FCC can do something...

Thanks guys, I have everything under control. The problem has been resolved

It’s a Dish 1000+ that I am trying to set up. Dish Setup Print Setup Instructions The following information is used to correctly align your satellite dish installed in ........... to receive signal from the EchoStar 14, Anik F3, DirecTV 7S (119.0 W) satellite. Compass Reading: 244.1 deg...

Rookie question....what do they mean by LNBF Rotation +34.4 degrees? Do they mean that I have to add 100 degrees so intact the rotation will be 134.4 degrees? Thanks

I have resolved the problem. Thanks for all who wrote. All your advice was invaluable.

Thanks for the information.

Yes. I am. I complained to the agent that I was not receiving the channels I paid for. He sent me the wrong LNB and Dish Reflector in the first place. He has now sent me a DPP 500+ LNB but not the proper reflector. I am trying my best to do this installation myself. In the meantime I am trying...

What do you mean by Run 2-3 ghz cables from the lnbf to a Solo Node. Do you mean to get a connector which would allow me to join the three cables as inputs and then I would only have one output to the Hopper?

Seriously, I am a newbie trying to install a dish all by myself.

That sounds like one of the benefits of Alzheimer's....I am not there yet...cm still do newspaper crossword puzzles in the adult section.....lol

Oh I see Two different technologies. Good to know.As I said before, I a newbie. Lots to learn.

It’s good to learn the new technology. You learn something new everyday.

Thanks for the information. I will search the internet for installation information. BTW can I use a SW44 switch instead of a DPP44 switch?

I am a newbie and I need help with respect to the new DPP 500PL LNB. I need to know if the connections in the attached photo is correct i.e. Port 1=119 Port 2=110 Port 3=18.7 Connection from 129 goes to LNB in My understanding is that the DPP 500+ has it’s on built in switch so there is no...

I am really am sorry to have posted my dilemma if I knew what the response was going to be like concerning the illegality of having Dish in Canada. I know what I am doing is not right, however when the Government of Canada has taken away my rights by allowing me not to see American programming...