Recent content by bouser

Don't mean to bud in, but I have a similar problem running a dpp44 with a 722 and a 501. I though the dpp44 would support both. The 722 is on port 1 (722 supplies power to the switch) and the 501 is on port 2. The 722 picks up 3 sats on one tuner and one the second tuner, the 501 doesn't pick...

If it's using a card, I bet the card is not pushed in all the way, or it's loose in the slot. With the receiver on itls end the card may have a tendency to wiggle slightly out of its socket. Also, the coax leading into the receiver may be loose or not making a good connection, either at the...

will a cable box produce the signal I need for the vip 722?

That's what I'm getting at. Can anything be done to the cable signal ( like a cable box ) to convert QAM to ATSC for input into the tv input port on the 722?

If it's and output port, why doesn't the scan pick up the cable channels?

Some lcd tv's interfere with infrared remotes, especialy during the first five minutes after you turn on the tv. Try turning the tv off but leave the sat on. Change the channel on your sat, then turn the tv back on. If the channel changed, then its backlight interference from your lcd tv. I...

The vip 722 has an antenna input and a setup screen where you can select the type input you have (over the air, irc, hrc, or cable). When I plug in the tw cable tv coax and run a channel scan, no channels are found. It works fine with an over the air antenna; but I want to use the 722 box to...