Recent content by cbinak

I have a problem with my dish setup.I have a dual output lnb(119 only) , each side is running straight to a 211 reviever.Living room 211 will only get odd transponders.But if I turn on the bedroom 211 ,the living room 211 works fine, gets all channels then.Any ideas?Thanks for looking

I'm in Alaska.I have two(2) six(6)foot dishes one pointed at 119 (on transponder 19 I get 52 on a sunny day)and the other at 129 (on transponder 24 I get 20 on a sunny day) with DPP lnb's going to DP44 (with powered line on input 1) and DP33 .I have four (4) ViP722's (running five(5) tv's now)...

I live in Alaska, where we live we need 6' dishes to get a strong signal. I am trying to get a setup with 3 friends ( we live about 250' apart each way) to get three satellites(110,119,and 129).I have 3-722 receivers,2-211 receivers,and 1-625 receiver. One friend has 1-722,2-301's and the other...

Thanks,the items are at these sites,under export items.The lnb holder is-( juction clamp for channelmaster) and the legs are(feed legs for 1.8 meter dish).Thanks again for the help.

I was wondering where I could order parts-lnb holder and arms-for my Channel Master 1.8 meter dish.I live in Alaska and there is no dealer around?Thanks