Recent content by Chile

UPDATE: I moved the DPH42/H3 to the permanent position again. I initiated a check switch and simply walked away and started configuring another dish/ LNB set to eventually install in the permanent position for either the 110 or 129 link. In about 15 minutes the system locked the 119 and I was...

JIM5506: Thank you for reviewing my issue. Yes I did run a check switch. The H3 did not identify the DPH42 in the permanent position. Returned a "NONE" for the switch "TYPE". The Wally/DPP44 identified the DPP44 and worked fine. The H3 identified the DPH42 in the temporary position and worked...

Thank you for your timely informative responses. I am now perplexed. I configured the single DP LNB on 76cm dish and aligned to Sat 119. I fed this to a DPH42 and then on to the Hopper3. All is fine. I will be adding a 110 dish and 129 dish in the near future. All three will be interfaced with...

We are in a location where we have clear LOS to the 119W satellite only. We are fine with that in that this is a temporary siting for us and the 119 provides most to the programming we will use for now. I plan on using a 76cm dish with a Disk Pro single LNB feeding a Wally. Considering this is...

Thanks to all for responses. I will look at the odd/even transponder SS's when I get back. I am assuming that a degraded LNB could result in a variety of strange indications. Thank you all again, Chile

We are configured with three separate single LNB dishes feeding a DPP44 with a trunked DPH42 that feeds our wally receiver. We are in western arc territory. The Sat 119 and 129 signal strengths (SS) are fine. The 110 however is strange. How is it possible to to receive an SS of 50 on transponder...