Recent content by dave2609

From the sound of it, The products with the shortest shelf life will get the biggest price cuts...makes sense to me,

Not necessarily... I have ran across a power inserter that would sound a pocket toner but would not pass frecguency...putting out power matrix seen no switch box detected. removed the inserter and everything worked fine... replaced it and everything fine... put the old one back and no swicth box...

Dont know much about the actual satelites but from what i have been reading how big is this bird? It was stated that its low orbit was 500 miles is it possible for it to be captured by a space shuttle and then be redeployed? I just install satelite receivers so most of this is greek to me.

Sounds like you power inserter for you dpp44 switch is bab(not allowing the fequencey to pass thru)

the way it looks you can add 2 more single tuners or 1 dual tuner with your setup just hook it up to the 34 switch

do a factory reset to default, front panel reset, lock signal on 119 tp 19 . cancel out to get to download screen

just a suggestion ...but try a factory default reset with a hard reboot on each receiver(unplug for 30 seconds)

I have manage to control emerson tv's but have never found a code to control an emerson with any type of built in vcr or dvd or both

Thanks

best guess would be to check with your local DNS or Dish RSP warehouses, some local retail shops might have acess to them

I have been hearing about this also and correct me if im wrong,,, but could these missing channels with a rebbot fix have anything to do with the shuffleling of channels from satelite or transponer to another?

It will work like this, and on the other hand this will also give you ota signal at you tv2 locations, just not digital

Have talked to dish tech support and this is a common issue with the 625 and new software, appartently some (not all) are being effected.

hello also

not a clue ( but it would need the 20 inch dish a dp dual and a dp21 switch)