Recent content by diesel3406

  1. D

    Freezing on G10 11.719

    Ok, so because I do have signal quality on 11.720, then I must be getting to much noise (crosspole) probably from echo9 bird. But how do I try to correct the problem. I tried changing my freq. for the lnb from 10750 a little but it didnt seem to help. Should I go to a bigger dish, which I...
  2. D

    Freezing on G10 11.719

    I have a coolsat 4000 pro, sg2100, fortec 80cm dish. I can get all the other tp (11.800, 11.987, 12.116, 11.807). These all come in with signal b/w 70 - 82 and quality of 65 - 75. But whenever I try any channel on 11.720, it is constant freezing and broken audio, but the signal is 79 and...
  3. D

    PBS AC3 and coolsat 4000 pro

    Finally got my dish (30" fortec, lnb, and coolsat pro 4000 back again). The only thing that survived the original shipping was the sg2100. And the moron's bent the dish in shipping AGAIN. It's not fedex fault when they dont put a single piece of packing foam in the box (Unfortunately, I...
  4. D

    True South, Mag Declination.....

    Give your zip, I will run the data True south is not 180 on compass, but rather 180 - magnetic declination.
  5. D

    Missing channels on G10?

    Finally making some headway, but.... I've gotten tuned into G10 with about 63 on quality and did a blind scan (coolsat 4000 pro). It has picked up 25 channels, problem is I seem to be missing all the channels from 11720V even with a manual scan of that TP (which has a quality of green 63)...
  6. D

    Cant find signal and dont understand receiver setup

    My picture is a lot more stable now. Apparently thunderstorm cells were developing. Just got 1.3" of rain hail in 1/2 hour. Suprized this was causing freezing 6 hours ago. Anyhow, the coolsat is off by .001 on several TP (11.719 instead of 11.720). In fact, I still cant anything on 11.719...
  7. D

    Cant find signal and dont understand receiver setup

    Pete I do have some major concerns over this lnb right now, but not much I can do about till monday (and then a week shipping). The equipment is all new, so I will contact the vendor about it tomorrow. Signal quality shouldnt bounce from 60 to 30 (back and forth). Is this a strong...
  8. D

    Cant find signal and dont understand receiver setup

    Pete I see now where you get those numbers from, but it wont allow me to edit SR. After I entered a new freq (11.986) and did a blind scan, it came up with 5.150 for SR. Signal quality changes from 60's to 30's (back and forth), and it wont pick up any channels from there. The signal...
  9. D

    Cant find signal and dont understand receiver setup

    Rick in MD Thanks for the response. Thats where I was trying and I finally did get it aimed. I am getting 65% quality on that (although it is bouncing as low as 30's for split seconds. I've moved to G10R and am able to get some channels there. I did a blind scan, and got about 20 some...
  10. D

    Cant find signal and dont understand receiver setup

    I searched thru a lot of posts here last nite. I now understand my questions better but still dont know the answers for sure. Coolsat 4000 pro SG2100 Fortec 80cm dish Coolsat KU LNBF model CS-LNBL, RF 11.70-12.20Ghz, IF 950-1450,Lo 10.75 Ghz No diseqc switch installed location 49.7N...