Recent content by Hyper Casey

Here is the Test File. For the Amiko MINI 4K UHD S2X Receiver Only. V1.0.69 Allows the User to Manually Set the Symbol Rate of a Transponder as low as 100. The technical staff of the Demodulator said that the minimum should be greater than 200, and the locking will be relatively slow. Please...

I have new firmware for the Amiko 4K UHD that can go down to a SR of 200. However I am not able to test it, I don't have Ku Band at all right now. I will have to get some volunteers to try it out.

The Amiko Mini 4K UHD S2X can go down to 1000 S.R. (Symbol Rate). I believe the Amiko MINI HD265 can as well. I remember this because early on elbandido (some of you know who he is) helped me to help the team at Amiko to improve several aspects of the receiver and this is one of them.

Yessir, we (HyperMegaSat) do still sell these at our eBay store. Use the link posted above by comfortably_numb. And send us a message on eBay and we can load the Music on 101 for you, or, you can load it yourself, we posted the bin file here at Satellite Guys a while back.

Judging by the pictures that is an old Directv LNB so that will need to be replaced with a new LNB that will work for FTA. It also looks like the LNB holder on your dish is 30mm diameter. FTA LNBs require a 40mm holder, so i think you will need to replace the LNB bracket too. You can try...

The Amiko Editor Software did not work very well for me. I used it several times to add the Mood/Muzak Radio channels on 103W, (now 101W). I was able to get the job done, but the software crashed often for me, very frustrating.

Get out a tape measure and tell us the size of the dish. As far as the LNB the pictures are not clear enough to read the label. I suspect it is for dish network, not FTA, but that's a guess. Let us know the model # and what does it say for L.O. Freq.

Excellent post sat_cat_25. Backlash or "slop" on a H-H motor is so annoying, and has been a problem on so many models for years. It is too bad that this DM2800 Opticum motor needs to taken apart and modified like this, but on the other hand, there is not a lot of choices out there as far as H-H...

Thank you freddylq. It will be shipped immediately.

Dinner tonight = Beer (and lots of it). And when i am done drinking beer, i will a have a can of Spaghettio's (with meatballs of course). It's been one of those days.

4/3/2025 - Edision is out of stock on the TL-2 0.1dB Twin Output PLL Universal 9750/10600 Ku Band LNBF, AND the SL-2 0.1dB Single Output PLL Universal 9750/10600 Ku Band LNBF. We (HyperMegaSat) do still have the SL-2 Single Output Model in Stock, but only a few dozen. Once these are gone...

My local OTA guide is good now. Titan TV has updated its guide. And on my Roku TV the guide has updated (although the channel name has not) So i am good to go.

Thank you sir!

What brand are you going to SWITCH to? Pun intended. lol But seriously, curious what switch you will use, there can not be many choices out there for a 5x8 switch these days.

nkapon - you can try here to get a quote to re-point a dish http://ftainstall.com/ :cool: