Recent content by jaytee4320

  1. jaytee4320

    Canadian satellite

    If you search for Canadian Satellite Services on this forum you'll find info about Bell and Shaw Direct but only Shaw would available to you...and of course you will need an account.
  2. jaytee4320

    Bell

    If you're not able to get an answer here you may want to go to digitalhome.ca forum...lots of info there for Bell Satellite.
  3. jaytee4320

    Can anyone identify this old TV antenna wall jack?

    Looks like a very old 75 to 300 ohm balun used when the tv used 300 ohm twin lead connections instead of coax.
  4. jaytee4320

    97W STAR 5 Radio, No sound, Signal Quality 71%, 11836/V/20769.

    No audio here as well...problems at the source I would guess.
  5. jaytee4320

    OTA adapter on the Edision OS MIO 4K

    Dusted off my 950Q that was laying around for 5 years since I went to HDHomerun Connect tuners. Plugged it in,rebooted and scanned in 52 channels from US and Canada...you're right Corrado it's very sensitive. Really like the EPG...nice and easy to set recordings. I'm also using NA SDGr image.
  6. jaytee4320

    new MIO odd video issue

    I had the same issue earlier this week with my new MIO and an older Panasonic plasma...turns out not all tvs work with 50hz and Brian patiently helped with this and other issues.
  7. jaytee4320

    Installing my first motorized C Band Satellite Dish (w/pictures)

    I've had devices using the same codes and it's annoying. You might try to separate your 2 devices or cover the ir receiver of the ASC1 with a piece of tape.?
  8. jaytee4320

    Where did all the PBS channels go?

    Maybe you do have a problem with your gear...all PBS channels coming in fine here on both 87 and 125.
  9. jaytee4320

    GEOSATpro HDVR3500 - New DVBS2 STB - Photos and Initial Testing

    It would be interesting to hear from anyone who has successfully upgraded to 1213. I've had no luck via internet or usb...reverts back to 1152.
  10. jaytee4320

    GEOSATpro HDVR3500 - New DVBS2 STB - Photos and Initial Testing

    Yes, thank you, I just discovered that longitude and latitude settings did not get restored...entered again and working good now.
  11. jaytee4320

    GEOSATpro HDVR3500 - New DVBS2 STB - Photos and Initial Testing

    Got auto updated to ver.1129 this afternoon and now cannot move my ku dish using usals...anyone else have this issue? My Amiko A3 works fine using same setup.
  12. jaytee4320

    Roku 3 question (s)

    The remote is RF but the Roku 3 unit excepts IR signals...I use my Harmony 900 and it works perfectly.
  13. jaytee4320

    GEOSATpro HDVR3500 - New DVBS2 STB - Photos and Initial Testing

    I noticed that also in previous firmware but working correctly now with firmware 1045.
  14. jaytee4320

    GEOSATpro HDVR3500 - New DVBS2 STB - Photos and Initial Testing

    Also noticed Galaxy 15 @ 133.0W missing.
  15. jaytee4320

    GEOSATpro HDVR3500 - New DVBS2 STB - Photos and Initial Testing

    I see this display problem on both SD and HD and on various channels. Today the symptoms are different...digits sequence or cascade over and over the 4 channel display and then freeze with random character display. When I change channel it displays properly again. I've done a hard reboot a few...
Top