Recent content by jerzstyle00

  • WELCOME TO THE NEW SERVER!

    If you are seeing this you are on our new server WELCOME HOME!

    While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!

    Thank you for your patience and again WELCOME HOME!

    CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
  1. J

    Can I disable 'No audio/video' notice on kbox?

    Was unable to find anything in menu box to get rid of pop-up(unless I missed it).If anyone knows how please provide details.
  2. J

    Can I disable 'No audio/video' notice on kbox?

    I set my kbox stb on 97w using a/v wiring instead of coax.But for some reason screen on TV keeps displaying 'Notice:No Audio/Video'. Is there a way to get rid of that notice? I need to press the exit button on the remote inorder to remove it as it pops right back after 30 seconds or so.
  3. J

    Did i purchase a bad birdog?

    Im using a universal LNB and here are my settings on the birdog.I just changed the BER from Linear to LOG.The RF setting is set to Linear instead of DBuv.Is there a setting I need to change since im using a universal LNB instead of a standard? I will try aiming again later using these new...
  4. J

    Did i purchase a bad birdog?

    I recently purchased a 'BirDog' sat finder and put to the test yesturday but did not have sucess. I was able to update the birdog with a new file of sats but was unable to find 97W using it. Here's how I tried using it: -I aimed for 97 west uding my stb able to get 80 quality. -I then removed...
  5. J

    Help with digipower sg2100 dish motor

    Well I already made the purchase a few days ago but Im taking it from your comments now that the 22khz switch will not work with the dpp44 switch and dishnetwork reciever and only works with fta equipment? If so, then is there not a way to connect my fta dish and provider dish together using...
  6. J

    Help with digipower sg2100 dish motor

    I was doing some reading in the forum about switches and it states that a 22khz switch will not work with a universal LNB.Since I am using a universal LNB on my dish, Im guessing this will not work and I will need to install a standard linear LNB instead? Here is the diagram.
  7. J

    Dish Network/FTA-how to switch between two systems*help*

    Im currently trying to figure this out just like you and someone suggested the following: "Get an Ecoda 22KHz switch(es), connect output from DPP44 to 0KHz side and other cable from the new 97 to the 22KHz side then out to your receiver. You must enable or turn on 22KHz tone for Sat 97 on your...
  8. J

    VIP222 compatibility questions

    LOL Not at all man its just I lost track of one of my threads as I forgot to subscribe to it.But thanks to Iceberg its been found.Would be nice if threads can be automaticallly saved when the OP starts a thread but hey no complaints here just a suggestion to the forum we all love.
  9. J

    VIP222 compatibility questions

    :shocked wow no replies yet. Where are the experts hiding out today?:cool:
  10. J

    Can anyone help with this?

    Looking to hook up sub VIP222k. Currently have following set-up on roof: 2 direct tv dishes with 3 legacy lnb's(110/119 and 118) going to 4x1 disqec switch. 1)is the VIP222 compatibile with both legacy lnb's and the 4x1 disecq switch? 2)If not compatible with disqec switch can it be replaced...
  11. J

    VIP222 compatibility questions

    Looking to hook up sub VIP222k. Currently have following set-up on roof: 2 direct tv dishes with 3 legacy lnb's(110/119 and 118) going to 4x1 disqec switch. 1)is the VIP222 compatibile with both legacy lnb's and the 4x1 disecq switch? 2)If not compatible with disqec switch can it be replaced...
  12. J

    Can someone clear this up for me?

    Can I combine a sw21 switch near the DP34 inorder to have only 1 cable go to the reciever and use a seperator on the 2 tuners or will that not work?
  13. J

    Help with digipower sg2100 dish motor

    Here's an update on what I did today. -After installation,moved dish from garage to yard.Also set the tv and reciever outside as well to make it easier finding 97W. -I set the lat/long using Usals(lat=33N,long=97W),pressed 'go to sat'on stb but for some reason the motor kept rotating west...
  14. J

    Help with digipower sg2100 dish motor

    I believe I have the orginal motor since it has 1 button.When I press the button it only goes west for some reason as I want it to go east since it passed the 80 mark of the west side. I can also press the reset button using a pin to reset the stb settings but just curious to see if there was a...
  15. J

    Can someone clear this up for me?

    Do DPP33 and DPP44 need a power inserter as well?
See more
Top
Back