Recent content by jhall299

Can I hook up two receivers without the 44 switch? Jon

Do I need to go through Dish to change to EA or can I just buy a 1000.4 dish and install it myself? Will it work with my DPP44? Jon

To do EA would I need a new dish or LNB? What is the azimuth/elevation for EA at 08098? Jon

I get my HD from 61.5.

I have a vip-622. Jon

Is there any alternative to 119W? If I have lost LOS getting it back is not going to be easy. Jon

Thanks Stardust3, My Zip is 08098. Jon

I believe I have LOS. Does anyone know how much lower 119w would be that 110W in south New Jersey? Jon

HI, I have a dish 500 with a dual LNB for receiving 110W and 119W. A couple of weeks ago reception on 119W slowly faded to 0. So far I have tried peaking the antenna. I get a great signal on 110W but nothing on 119W. I replaced the dual LNB and even replaced the coax running from the 119W side...

Hi, I currently have a vip622 and a vip211 and I need to add another SD receiver. What is the cheapest way for me to do this? Can I just buy one on Ebay and plug it into my DPP44 with no fees? Jon

Something vetter than unplugging it is prefered. Is there a way to default it to it;s original config? Is the proceedure the same for a 211? Jon

It's back! Gone for about 20 minutes and then back. FWYW my signal strength was 102

Has anyone else lost WPVI out of Philly? All I am getting is a dull white screen. The SD channel is fine as are my other HD channels. Jon

What is the difference between the 5.0 and 5.3 IR remote? Same question for the 6.0 and 6.3 UHF remotes. Are all of these different Dish remotes interchangable? Jon

Just to close the loop on this...I have my DPP44 hooked up and working just fine without the use of a power injector. It even feeds through about 200' of rg6, No problems! Jon