Recent content by jklein4663

Thanks for the suggestion, gatedude. I've previously done the tests with both tuners disconnected like you and Winegard suggest, but it doesn't make any difference. If the tuners get out of sync, tuner 2 comes up with the wrong configuration. The Trav'ler has a Dish Network dish and LNB setup on...

My receiver works correctly when connected to a Dish 1000, triple LNB dish. It finishes Check Switch after only 4 or 5 tests (I don't remember which), and both switches show something like "DPP 1.k2". The 836 warning doesn't always come up. I just ran the tests again, starting with the dish...

I don't know about rick, but I am using rg-6 cable on both inputs. The problem is not signal strength; it's which satellite the dish is pointed at during a particular test. If tuner one is doing a test that requires the 110 bird, the dome will move the dish to that satellite. If tuner two is...

Speedy - You're correct, we're both using two separate cables from the LNB to the receiver, so the separator is not an issue. The problem is in the receiver; something in the software has changed that allows the tests to proceed at totally different rates on the two tuners. About a year ago...

I have the same setup on my RV, and I'm having the same problem. The desired result is SW64 on both tuners. (If I remember correctly, the SW42 setting is correct for the dome without the HD interface, and access to only two birds, 110 and 119.) The problems happen any time the two tuners don't...