Recent content by kjmiv

Update: I finally got a signal and have HD channels now. I had to raise the mast 3.5"; literally. No exaggeration. I was able to get a great signal with the old LNB on the new slimline. I thought I had a clear line of sight because of that. I was wrong. I have it rigged up now on the old...

I am getting them for all transponders except for 4,12,20 which is what I expect.

I thought it said BSF. I am willing to try it with the BSF hooked up at this point.

I'm not using a splitter anymore. No BSF. When I input the satellite type on the H20 under settings it tells me not to use a BSF. I believe the wiring is correct.

I took the new PI and the new LNB and installed them both on a known working system. They both worked fine. The problem isn't the PI, Slimline LNB or the cable. Everything is hooked up correctly. I also know that I am aimed at sat 101 and getting 97-100's with the Phase III LNB on the new...

I am again stuck at work today. I can post numbers tomorrow for 101. I am going to take the PI and untested tip and try them both separately on a known, working system. I'll be able to rule them out. I know the cabling is fine. I'll keep you posted.

I am using the Slime line SWM 3LNB. The old one is a Phase III.

Yes, when I connected the old LNB I disconnected the PI. The connections are now correct and I have used a known, working LNB without success.

I do not have a model number. It is older. Looking on eBay I think it is a DX54. I didn't take a picture of it so I'll have to get back up there. It does have multiple cable outputs and multiple "heads"?

Hello, I changed everything around and it is hooked up like above. I did get rid of the splitter since I only have one box. I powered everything on as described in sequence. No luck. It doesn't recognize a signal. I changed out the new HD tip with the old LNB tip and got 97-100's on the...

I am at work so I can't check the connections but I don't think I misspoke. I'm guessing that it is hooked up wrong as I took notes on my phone so I could write this later. Also, I guess I am referring to the entire dish as slimline 3s. The LNB is a single lens with one connector. I think I...

Hello everyone, Longtime lurker looking for help. I've simply never had anything to add here. You guys do a great job and explain things much better than I can so I've been mum. Here's my situation; Receiver:H20 Dish type: Slimline 3LNB swm I currently have Directv and I am...