Recent content by kpartin

I have the 6.3a update. Never used the program guide much before, but it does "feel" a little snappier.

A splitter won't work. You will either need a second cable directly from the dish (if available), or a multiplexer to give you the additional capacity you need. Don't know about the access card.

Forget the tree idea. Dish alignment is critical, especially with the 5LNB dish, and a swaying tree is not going to maintain a good signal for you. Even if the tree doesn't sway, it will expand, contract, and grow, all of which will put you out of alignment. I'm not real familiar with roof...

I have ATT CallVantage and never changed anything, and none of my 4 receivers ever missed a call.

For signal strength, I get anywhere from 60-90, depending on the station. Signal strength is less important than stability. If it's consistent (not bouncing up and down), then anywhere from 60 up should work fine.

I had the same problem with my H10-250 --- I'm within 14-15 miles of the 4 big networks' transmitters, and had to get an attenuator from Radio Shack to reduce the signal a bit --- Even with my indoor Silver Sensor antenna. Works great now.

I have had 2 D10s and a Samsung DVR for about a year, with no problems. Also an H10-250 for about 6 months, also no problems.

Thanks. It works as you said. I did not realize there was no tuner in the D10. I appreciate your help. Keith :)

Yet another diplexing question. I have searched intensively but can't find the answer to my specific question. I want to distribute my DirecTV DVR output to all receivers in the house. I have a 3 LNB Oval Dish, Terk 5x8 Multiswitch, Samsung DVR, and three D10s. I am sending the signal out...