Recent content by mogold

My current home configuration includes 2 VIP211's in the living rooms and 3-301's in the bedrooms. Each receiver is connected to a TIVO, because 1) it is hardware I own and know and 2) it has been really easy to network them and share recorded content across the devices. DirectTV has their...

Insert Reality Check Here And the reality is: Sure cable deploys everywhere...but it started in the more densely populated areas, too, just like the telcos are. After all, what good does it do to lay cable (or fiber) in Podunktown if they can't afford to maintain it the subsequent...

"A "legacy" receiver (non-DishPro receivers, released before Dish301) can be connected to a DishPro DP34 Switch, when used with a DishPro Adapter. " Will I need a DP Adapter on the DP34 in order to connect the 501PVR?

I think this will work, but I want to confirm with you guys. I have read quite a bit, but still want to make sure. I have a DishPro Quad with 3 lines running from the LNB to my comm. closet. In the closet, each line is connected to a single reciever-301, 301, and 811, repectively. I want...

Candy Pieces = 49 Cash = $6.42

Went to Voom for a while, but came back to Dish this week. Antenna was still up and properly angled, but only 2 of 3 receivers will get signal. Here's what I have: Quad LNB w/integrated switch. 4 cables come down the mast and connect to a 4 port female/female connector. To this, cables...

MY Setup "Now if we could just get TiVo to allow recognition of an external antenna for local stations allowing correct channel mapping!" That is exactly what I have done, however my configuration may be unique. I have 3 TV's hooked up to VOOM using the 4 way splitter they installed. On...

I just had VOOM installed. I connected an atenna to the Tivo to overcome the local channel issue then I re-ran the guided setup on the Tivo to change to Voom and an antenna. Everything is fine until we get to the channel changing codes. Does 10035 work for anyone else? Is there another way...