Recent content by TheUser005

Thanks.. I guess I'll try the DishMovers first.. if they don't install it, then I'll just use existing DP34 and DishPro LNBs to make 622 work.

are you saying I don't need Dish Pro Plus LNBs and Dish Pro Plus switch... I can just use existing DishPro hardware? Is it true that using DPP44, I only need to run one wire to 622 and split it using a Dish signal splitter? But I am guessing I'd need new DPP LNBs to go with DPP44. Any...

Currently I have DVR510, and two 311s. 622 I bought is still sitting the box.. I haven't hooked it up yet. I have two dishes pointing at 110/119 and 61.5, both DishPro and DP34.

Please correct me if I am wrong but my understanding was that 622 is a DishPro Plus receiver, my existing DP34 is a DishPro which is NOT compatible. Same goes with LNBs. Also, since I haven't notified dish when I moved, they still think I am at my old address. I'll just disconnect...

I am an existing DN customer. I just bought vip 622 from ebay...I haven't activated it. I now realized that I'll have to change my existing DP34 switch as well as LNBs from DishPro to DishPro Plus. 1. I was wondering if DishNetwork will install this receiver for me free including new...

Thanks.. I'll give that a try.

I am just trying to get Dish 500 to work with 311. When I connect a RG6 to one of the connectors to the Dish500's TWIN LNB (BS1D1UP201M), I only get signal for 110. I can't seem to get 119. I tried the other connector on the LNB as well, but same results. Basically, I can't get 119.. Is...

I am looking for two brackets to install two dishes. Following link shows what I am looking for.. I don't need the pole, I only need the bracket that holds the pole. http://www.dishplace.com/images/mountpole.gif If you have them or know where I can get them, please let me know. Thanks

My 501 running software version P220 just died. It gives ne "serious error has occured, hard disk drive failed, Error: ????". I know the firmware contains a list of supported drives.. what are my options to replace or upgrade the drive? I don't necessarily need a bigger HD.. I am happy with...