Recent content by trussme

A friend is going to bring over a dptwin today we will ee if it workss if not going for the dpp33 Thank again!!!

Thank you allot that saves a little money!

Ill bet you have helped alot of people!!! I was told at another site that if i only used the two inputs 1,2 and not the lnb in the dp34 would bypass the switch in the dpptwin can i get the ame result if i changed the dpptwin to a dptwin?

I have a 722 and wanted to add it to my system but it wont get the 3 sats 61.5,110,119 the switch is a dpsw34 witha dpp twin with just the 2 cables running from 119,110 to the dp34119 to the top port and 110 to the 2nd port and 1 cable from the 2nd sat 61.5 running to the 3rd port on the the...

ok got ya! thanks

im confused about one thing when dn setup the systum they only ran one cable to the 722 and one to the 311 what does the 722 need the other cable for?

ok ill try that thanks ill let you know what happens!

i have tried that is thier somthing i need to do to the receivers beside check switch?

so your saying that there should be 2 wires from the dpp twin ports 1 and 2 and 1 from the single lnb?

what input do i use on the dpptwin the options are 1 2 and lnb

on the dpptwin right now there are 3 wires 1 going to the 722 and 1 going to the 301 and the 3rd wire goes to the 61.5 sat i would guess to use the dp34 i would connect the 61,5 sat to the dp34 sat in now on the dpptwin witch input would i use to get the 110.119 signal to the dp34 switch 1,2 or lnb?

Only going use a 722 but only with 1 tv and 2 301

I am trying to set up 3 receivers to a 2 dish system one dish with a single lnb gets 61.5 the other sat is a DPP twin lnb with 3 connections called 1.2.lnb ive verified that 1,2 go to the receivers and the one marked lnb is connected to the 61.5 sat lnb. can i use this setup for 3 receivers or...