Recent content by Vintagesports

  1. V

    Ajak motor with 5 magnet for reed sensor

    What's wrong with your ajak motor?
  2. V

    H to H slop

    In my case the slop is in the gears yes
  3. V

    Thank you Titanium Satellite

    Just want to publicly thank Brian at Titanium Satellite for an exemplary customer service! He helped me get my ASC1 controller fixed. Thank you Brian you are the best! Jose Sanchez from Puerto Rico
  4. V

    Norsat 3200F-BPF-1

    Why would Norsat build a new and expensive LNB with a Noise Temp of 70K? I have seen LNBFs out there with 5G filter with 15K noise temp so it can’t be because of the filter. I ended up purchasing one inspite of the noise temp but am still curious by the 70K temp Sent from my iPhone using Tapatalk
  5. V

    Unimesh Declination screw assembly

    That is fine just wanted to be sure I was setting my total declination angle right Thanks again Sent from my iPhone using Tapatalk
  6. V

    Unimesh Declination screw assembly

    Do you substract the declination offset angle to the latitude to obtain the elevation angle or the elevation angle equal to the latitude? Sent from my iPhone using Tapatalk
  7. V

    Unimesh Declination screw assembly

    Thank you A33 Sent from my iPhone using Tapatalk
  8. V

    Unimesh Declination screw assembly

    Thank you CompTech. What declintion angle does that equal to? I figure I must be doing something wrong. Here are pics pics of my setup. This equals to a declination of 2.72 degrees. Just looks to high compare with yours which should have a declination angle higher than that. I am in Puerto Rico.
  9. V

    Unimesh Declination screw assembly

    Thank you stecle this really helps! I was actually looking for one and had not been able to find it.
  10. V

    Unimesh Declination screw assembly

    Sorry to hear that Comptech, no worries. I hope she gets better soon.
  11. V

    H to H slop

    Thanks for posting this skink my Unimesh 12 footer has developed lots of slop lately too and I can't seem to find a way to fix it. Hope someone can help
  12. V

    Unimesh Declination screw assembly

    Just reread my post - The Unimesh is a 12 footer not 16. Comptech any pics of that declination screw to mount will definitely help. Thanks
  13. V

    Unimesh Declination screw assembly

    Thanks Comptech, Mine has a slide plate, just want to verify if the screw that holds it goes somewhere in the slide plate or in the hole that is below that slideplate
  14. V

    Unimesh Declination screw assembly

    Anyone have a picture of how the declination bolts are fitted into the mount ring on a Unimesh 16 ft dish? Just need to see how that part of the antenna is mounted. Thanks
  15. V

    AJAK Super Tracker

    Magic Static do you happen to still have Ajak Super Trackers? I installed Perfect 10 and would like to add one of those to the AJAK motor. Thanks
See more
Top
Back